Accepted Manual Signal Source Selection on Deco
Background:
Some users might notice that all satellite Deco units are connected to the main Deco, instead of the nearest satellite Deco.
Typical Layout:
Why does the satellite Deco still keep selecting the main Deco as a signal source instead of the nearest satellite Deco?
Deco will choose the best signal source by itself. The selection does not depend absolutely on the signal strength, but also on the connection rate. Sometimes satellite Deco units may get slower speed due to half-duplex mode and interferences caused by connected devices like phones, or other devices. To ensure the satellite Deco gets reliable speed, the main Deco stays selected by Satellite Deco after comparative analysis.
Some users tested that after moving one of the satellites far enough and not being able to reach the main Deco, they finally get the desired connection map:
However, the speed of the satellite becomes slower than what it could get when connecting to the main Deco directly. Due to the working pattern and protocol/regulation of Wi-Fi technology, the more wireless hops, the slower the speed would be. This rule applies to any kind of mesh or extender system. So it is not always good to connect to the nearest Deco unit.
Solutions
Deco Firmware Updates Adding Signal Selection and VPN for Multiple Models
Related FAQ:
How can I find a suitable spot for my Deco?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
When can we expect a fix for Deco M4? this has been going on for over a year, and we still are without a fix.
I'm trying to work and can't even work properly because TP-LINK M4 keeps pairing with the 1st Node, and not the 2nd.
I'm considering this a false advertisement:
3rd device doesn't connect to 2nd false. So this is misleading advertising, and TP-LINK should be penalized for that.
Once again, i'm experiencing this for over a year... was hoping to see efforts for a fix. but nothing. And the misleading advertising is still going on, misleading people in buying something that doesn't work as advertised.
I look forward to hear something from TP-Link soon.
- Copy Link
- Report Inappropriate Content
@Lexivienna can some help with a p9 fw I can try
- Copy Link
- Report Inappropriate Content
Hi, I happen to see that you are on firmware 1.4.3.
And the firmware 1.5.2 build 20210916 has added a new feature “network optimization” which would help optimize the signal source selection.
Maybe you could try to update the firmware to have a look.
@Andyl73 For the Deco P9, it is a little bit different from other mesh systems.
Once the powerline backhaul is activated, the signal source of the powerline backhaul is always from the main P9.
- Copy Link
- Report Inappropriate Content
Regarding P9 - I have the issue that the ethernet backhaul and the powerline backhaul is quite often broken and the decos are conneting to each other as the like.
So if it would be possible to set eg Deco 1 to Deco 2 only with ethernet backhaul and Deco 3 only to deco 2 via ethernet backhaul and all the other Decos (in my case Deco 4-Deco 6) to define other decos it would be far more stable.
- Copy Link
- Report Inappropriate Content
Just return them (if possible). It looks this is very well known and the same happened to me with the Deco X68. Without regards of the devices location, they ALWAYS look to connect in a "star" topology, which, evidently does not work for everyone. Then, it is claimed that the system "automatically" selects the best signal, which in my case, is also misleading not only network speed on far devices spoke by themselves, the system was not very stable.
I'm more than willing to "retry" these devices once I hear that those issues are resolved, otherwise, the price tag does not justify the effort.
In the meantime and even though they is not 802.11AX capable, three Google Wifi's (AC2200) are more stable, giving me coverage in places where the three X68's did not and I get around the same network speed (of course, knowing is not possible to manually select the source on the X68s, which may probably be the reason)
- Copy Link
- Report Inappropriate Content
@TP-Link Any update on this for the e4 & m4 units? I have 2 M4 units (1 as the router and 1 with a cabled backhaul at the other end of the house) and all the e4 units (3 of them) insist on connecting to the router instead of the closest backhaul unit. This results in slow speeds.
- Copy Link
- Report Inappropriate Content
@TP-Link
Any firmware available for S4?
This is extremely disapointing to have to find out that these products do not do what they are advertised as doing.
The reason I purchased these is precisely due to the advertisment of they operating in a 'ranch style house' but they absolutely do not work that way.
Very disapointing. I hope there is some beta firmware available that will allow me to select the source manually to enable the ranch style house configuration.
- Copy Link
- Report Inappropriate Content
This is a textbook case of false advertising.
This product does not do "mesh" networking at all.
@tplink I want a full refund for my purchase since the product does not do what it claims to do. I will return my hardware to you. Where should I (we) send it? Thank you.
- Copy Link
- Report Inappropriate Content
I am using M9 Plus and updated the latest firmware but there is no option to allow me to manually select the Signal Source. All my statelite nodes are still connected to the main Deco with weak signal rather than the nearest nodes.
Please advise.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 31
Views: 55370
Replies: 155