Knowledge Base What is EasyMesh and how does it work with TP-Link routers and extenders?
You may have heard that TP-Link embraces an updated EasyMesh protocol that allows building a multiple-AP mesh network with certified products from various vendors. It also breaks new ground in the network deployment compared with the previous Mesh standard. In this article, we will talk about what is EasyMesh and how it works with TP-Link routers and extenders.
What is EasyMesh?
EasyMesh is a standard certification launched by the Wi-Fi Alliance, which brings a standards-based approach to multiple AP networks. This kind of Mesh allows devices from multiple vendors to be onboard, configured, and able to communicate with each other to form Mesh Wi-Fi. This brings flexibility, enabling devices from different vendors to work together to increase capacity and effective throughput by forming a smart and adaptable network. Refer to What is EasyMesh to find more details.
TP-Link is committed to the development of EasyMesh products and has launched a series of Wi-Fi routers and range extenders that are compatible with EasyMesh (Full Product List). You can choose a Wi-Fi router with range extenders to form Mesh Wi-Fi, or several Wi-Fi routers to set up the Mesh Wi-Fi. Theoretically, TP-Link EasyMesh will work with any EasyMesh-certified products thanks to the standardized EasyMesh technology. However, EasyMesh networking methods can vary based on the manufacturers, we highly recommend using TP-Link EasyMesh products together to ensure the best performance and full compatibility.
As for the management, unified management via the TP-Link Tether app or web UI is available for TP-Link EasyMesh-compatible devices. The main router will work as the management center. You can set and modify the wireless settings such as network name, password, and advanced features like Access Control and QoS on the router. The router will then synchronize with your extension devices. However, unified management is not guaranteed for devices from other vendors.
Setup Video for TP-Link EasyMesh Devices
What is Wireless Backhaul in EasyMesh?
Wireless Backhaul in an EasyMesh network makes it possible to wirelessly connect two EasyMesh products including TP-Link Wi-Fi Routers and Range Extenders together to build a seamless Wi-Fi network, this benefits both extended Wi-Fi coverage and Wi-Fi network stability.
How does EasyMesh Wireless Backhaul work?
Router - Router Networking
Mesh Wireless Backhaul between Routers
Yes, you hear it right. In an EasyMesh network, now you could define a router as the main router, and easily add a satellite router to boost the Wi-Fi coverage.
EasyMesh enables automatic synchronization of wireless network settings across all the EasyMesh nodes in the network and saves your time of manually setting up wireless SSID and password on a satellite device(s).
How to add a router to an EasyMesh network as a satellite device
Note:
1. It is recommended to connect no more than 3 mesh nodes (2 satellite devices) in a single chain for better wireless performance.
2. A firmware update may be required for some models to support Router - Router Networking.
Router – RE Networking
Mesh Wireless Backhaul between TP-Link Router and Range Extender
The brand-new mesh solution also allows you to add Range Extender as the satellite device which is wirelessly connected to the main router and builds a seamless Wi-Fi network. How to add an extender to an EasyMesh network as a satellite device
What is Ethernet Backhaul in EasyMesh?
In EasyMesh, Ethernet backhaul refers to the use of Ethernet cables to connect multiple mesh nodes in a mesh Wi-Fi network. In a typical mesh Wi-Fi network, multiple mesh nodes are placed throughout a home or office to provide a strong and reliable Wi-Fi signal in every corner. These mesh nodes communicate with each other to create a single, unified Wi-Fi network. This allows devices to seamlessly roam between mesh nodes without experiencing any drops in the Wi-Fi connection.
Ethernet backhaul in EasyMesh takes this concept a step further by using Ethernet cables to connect the mesh nodes, instead of relying solely on wireless connections. By using Ethernet backhaul, the mesh nodes can communicate with each other at faster speeds and with lower latency, compared to using wireless connections, thus you can ensure a more robust and reliable connection between the nodes, resulting in better overall Wi-Fi performance throughout the entire network.
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Please note that only some EasyMesh routers support EasyMesh Backhaul for now, you could refer to this thread for the specific information:
EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
EasyMesh Frequently Asked Questions
Q1. What TP-Link product will support EasyMesh?
Visit here to check all TP-Link EasyMesh Compatible devices.
Please be aware that certain models will require firmware updates to support EasyMesh, you could pay attention to the subsequent firmware releases on the TP-Link official website.
Q2. Can I use TP-Link EasyMesh products together with TP-Link OneMesh™ or Deco Mesh products?
Yes and No. Wi-Fi EasyMesh, TP-Link OneMesh™, and Deco Mesh are three different mesh Wi-Fi solutions provided by TP-Link. You cannot build a mesh network by mixing TP-Link OneMesh™ routers/extenders with Deco Mesh, but you can build up a mesh system with TP-Link EasyMesh and OneMesh™ devices. In another word, you can still build up a mesh network if you have an EasyMesh router and a Onemesh range extender.
Refer to the QA below for the main differences between EasyMesh, TP-Link OneMesh™, and Deco Mesh.
Q3. What is the difference between EasyMesh, OneMesh™, and Deco Mesh?
From the below chart you could have a general comparison between EasyMesh vs OneMesh™ vs Deco Mesh.
|
EasyMesh |
OneMesh™ |
Deco Mesh |
---|---|---|---|
Seamless Wi-Fi Network |
√ |
√ |
√ |
Working with a different vendor* |
√ |
- |
- |
AP Seamless Steering |
√ |
√ |
√ |
Band steering (Smart Connect) |
√ |
√ |
√ |
Router - Router Wireless Backhaul |
√ |
- |
√ |
Ethernet Backhaul |
- (Planned & Supported***) |
- |
√ |
AP mode | - (Planned***) | - | √ |
Mesh Protocol Supported |
802.11k/v |
802.11k/v |
802.11k/v/r |
Management Methods |
Web UI & Tether APP |
Web UI & Tether APP |
Deco APP & Simple Web UI |
Technology |
|||
Products & Compatibility |
Check TP-Link EasyMesh products >> |
Note :
1. Working with a different vendor*
Certified EasyMesh devices can work with each other, while we highly recommend using TP-Link EasyMesh products together to ensure the best performance and full compatibility.
2. Visit this site to get the EasyMesh Certified Products from multiple vendors*: https://www.wi-fi.org/wi-fi-easymesh-certified-products (from Wi-Fi Alliance®).
3. Planned*** : Kindly note that Planned is not a guarantee, as the plan can be adjusted or changed.
Q4. Will EasyMesh support Ethernet Backhaul?
Yes. EasyMesh will allow building a mesh network via Ethernet Backhaul, and some of the EasyMesh routers have already supported it via a firmware upgrade.
Visit EasyMesh Routers Support Building an EasyMesh Network via Ethernet Backhaul NOW to get more details.
Q5. Can I use TP-Link EasyMesh devices with EasyMesh products from different manufacturers or companies? Are they compatible?
Theoretically, TP-Link EasyMesh will work with any EasyMesh-certified products due to the standardized EasyMesh technology. However, EasyMesh networking methods can vary based on the manufacturers, we highly recommend using TP-Link EasyMesh products together to ensure the best performance and full compatibility.
Visit this blog to know more about EasyMesh: What is EasyMesh?
Welcome to leave your comments below regarding EasyMesh.
Related Articles:
Early Release EasyMesh Firmware for Archer AX55
EasyMesh Routers Support Building an EasyMesh Network via Ethernet Backhaul NOW
General Questions about EasyMesh
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
elriczuko wrote
Hi TP-Link, I see that A6 & A8 routers are now compatible with EasyMesh, is there a plan to add the functionaly to the A7 routers as well?
Thanks.
@elriczuko As per the EasyMesh-Compatible Devices List, it seems Archer A7 is not included.
- Copy Link
- Report Inappropriate Content
@Kevin_Z i know its not on the list but any chance we will see Archer AX11000 get EasyMesh?
- Copy Link
- Report Inappropriate Content
After our research and ranking, we selected the Netgear Nighthawk X6 as the best Wi-Fi router for long range available today
- Copy Link
- Report Inappropriate Content
Coolant wrote
@Kevin_Z i know its not on the list but any chance we will see Archer AX11000 get EasyMesh?
I'm sorry that I cannot give you an answer now, as most of the routers and extenders are still in the planned stage for EasyMesh. You can pay attention to the EasyMesh Compatibility List, or subscribe to this thread, we will update it once there are new models that support EasyMesh.
- Copy Link
- Report Inappropriate Content
What is heard about AX10? As I notice that from the list of those "planned" for EasyMesh, more than 90% have the function implemented, only AX10 and one other model, two do not have the function... it seems absurd to me..
- Copy Link
- Report Inappropriate Content
A6 V3 was planned from beginning, even v2 was added in the list few days back and today i checked that V3 is also removed from the list. So, its wrong that most of the planned have received the easymash update, the truth is a lot of devices has been removed from planned list. So, Its a good news for you that AX10 is still in the list.
I now have to stop checking this forum daily for the update on my second router A6. Easymesh update on C64 is also useless now for me. Thank you TP Link for saving my time daily (future) to check these forums.
- Copy Link
- Report Inappropriate Content
Sorry to disappoint you since there is no plan to add the support for EasyMesh on Archer A6/C6 V3.
We always recommend choosing a router based on the features that are currently offered, and not what could be.
Please also keep in mind that while our teams may provide hints on what models are to receive a feature, it is definitely not an exhaustive list, and the models supporting features are always changing, meaning that models can be both added and removed, or even just updated without warning.
- Copy Link
- Report Inappropriate Content
Dear @Kevin_Z good day.
What are the chances of Archer AX73 V2.0 getting EasyMesh soon?
On the site it has been written for a long time that it is planned, but that upgrade for EasyMesh is never released...!? 😉
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 19
Views: 84346
Replies: 124