Official Release Deco X50(V1) 1.1.0
Hi All and @JoaoRamos, @knittl79 @macroth72
Hi All,
Good news! Apart from the 1.6.0 firmware for Deco M5, the official firmware 1.1.0 for Deco X55/Deco X50 has been released recently,
They would be the first batch of HomeShield models to have customized signal source and connection preference as well as other features available on 1.6.0 of M5.
Deco X55(EU/US/JP/CA)_V1_1.2.0
Deco X50(EU/US/JP/CA)_V1_1.1.0
More details about New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
Notes:
1. Please update your Deco APP to the latest version for the new features.
2. If there are non-1.6.0/1.1.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
3. You may miss some new features when Deco is set to Access Point mode.
As usual, the 1.6.0/1.1.0 firmware version is a leap forward and any feedback after the firmware upgrade will be highly valued. If you have any confusion about the firmware upgrade, please feel free to comment below.
Related Articles:
Deco M5 1.6.1
Deco M9 Plus 1.6.0
Deco M4(V4) 1.1.0
Deco X55(V1) 1.1.0
Frequently Asked Questions on Deco Firmware Update
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Before downloading the Deco log, I decided to reboot the camera and Decos for a "clean" test. I did several tests and I could not re-produce the camera problem. I tried to force it to change the Deco and it worked without problem. Either it's a camera bug or a firmware bug. If it happens later I'll tell you about it.
I still leave the brand and model: SriHome Model SH038.
I could check the log of the main Deco and I see several errors like "daemon.err nrd[18636]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3" all the time. I restarted several times the Decos and the modem/router of the provider and this problem persists (attached 3 logs in different time).
I put another router that I have at home, replacing the Deco X50 model TP-Link Archer AX50 and this error does not appear.
My provider gave me a Huawei Echolife HG8247H5 modem router. This equipment is configured in bridge mode.
What is your opinion about this?
Answering another question that @David-TP asked me: if there is no alert on the smartphone screen, will you see any notifications in the Message box on the APP?.
The answer is yes. That is, when I use the X50 Decos I don't get a popup while the app is running in background, but if I open it, I see the message that a new device connected to my network.
This does not happen if I use the Deco M5. The message with the app in background comes ok. It's weird because the cell phone and the app is the same.
Thanks!
- Copy Link
- Report Inappropriate Content
Thanks for the update.
As for the error log, I do see another user mentioned the same logs and he also has Deco X50:
https://community.tp-link.com/en/home/forum/topic/592212
Tue Dec 13 14:16:46 2022 daemon.err nrd[26921]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3
Tue Dec 13 14:16:46 2022 daemon.err nrd[26921]: wlanifMapToPhyMode: Invalid PHY mode from driver: 20
Tue Dec 13 14:16:46 2022 daemon.err nrd[26921]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 20
I am not quite sure what it means and will check with the engineer later.
For the popup alerts on the mobile screen, I did not have Deco X50 available for the test yet and would like to follow up on your case by email to seek for more advice from the engineers. Please check whether you are able to get an email from me later.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Hi David,
I have the exact same issue that @xplodzs faced.
After updating my 3 units of Deco X50 to the latest version (1.1.0) the ethernet connection keeps disconnecting from the main deco to the satellites.
The 3 of them are connected in router mode via ethernet. My wifi is set as 2.4/5Ghz and it worked flawlessly before the update of the APP to the v3.0 and the firmware of the decos.
I have reviewed the logs and the error wlanifMapToBandwidth: Invalid bandwidth from driver: 3 is getting repeated over and over again.
Indeed I am just 2 meters away from one wired Deco.
Do you have any idea of what could be causing this? Should I factory reset all the Decos?
BR
Lucas
- Copy Link
- Report Inappropriate Content
When is the update coming to x60 which is by the way a more superior model than x50? Cant believe we're treated this way.
- Copy Link
- Report Inappropriate Content
Is this a manual update as just got the X50 triple pack and it says when checking that the firmware is upto date, but its on 1.0.8 Build 20220407 Rel. 69134
- Copy Link
- Report Inappropriate Content
Yes, https://www.tp-link.com/en/support/faq/1599/ Method 2 via web UI.
- Copy Link
- Report Inappropriate Content
@David-TP Thanks, I've manually updated and this has resolved my network speed issues across all devices, now get my full 330/50 internet speed, so hoping when switch to 1Gb internet i won't see any issues
- Copy Link
- Report Inappropriate Content
@David-TP https://community.tp-link.com/en/home/forum/topic/584954?replyId=1148576 problem repeat and repeat ,,after reboot Deco'S - work few day
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@MarleMore you can install manually, by downloading the update, unzipping it, then update via the web interface
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 17287
Replies: 67
Voters 0
No one has voted for it yet.