New Release Wi-Fi Routers Support DoH and DoT Network
Good news!
We are happy to announce that there is new official firmware rolling out for multiple routers, including the BE, AX, and AC series, which adds DoH and/or DoT. Welcome to upgrade and install this version of firmware to try it out.
This Article Applies to:
Model & Hardware & Firmware | DoH | DoT | Update Date |
---|---|---|---|
Archer BE11000 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
Archer BE700 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
Archer BE550 Pro_V1&V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
Archer BE3600_V1_1.1.0 Build 20240729 and newer versions | √ | √ | Sep 2, 2024 |
Archer BE230_V1&V1.6_1.1.0 Build 20240729 and newer versions | √ | √ | Sep 2, 2024 |
Archer AX55(EN)_V1_1.3.3 Build 20240628 and newer versions | √ | √ | Aug 16, 2024 |
Archer AX55(US/CA/TW)_V1_1.3.2 Build 20240325 and newer versions | √ | √ | -- |
Archer C80_V1&V2.20_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Archer C6_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Archer A6_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Archer C64_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Archer A64_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Archer C86_V1_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Archer A8_V1&V2.20_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Archer C59(US)_V4&V4.8_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Archer AC1900(US)_V1.6_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Moderator Note:
1. The availability of DoH and/or DoT may vary by region even for the same model. Please check your local website for more information.
2. The above list might not include all models and hardware versions. It is recommended to keep watching the firmware releases for your router, as all the newly supported features will be listed in the patch notes if/when it is added to your version.
3. DoH would not be available when the router works in Access Point mode. Visit this FAQ to know more about the difference between Access Point Mode and Router Mode.
Introduction and Configuration
DoH/DoT Introduction
DoH (DNS over HTTPS) and DoT (DNS over TLS) are two methods that enhance the security and privacy of DNS queries in network communications.
DoH encrypts DNS queries within HTTPS traffic, making them indistinguishable from regular web traffic and difficult to monitor.
DoT uses a dedicated TLS connection for DNS messages, ensuring they are secure from eavesdropping and tampering.
DoH/DoT Configuration
You can go to Advanced > Network > Internet page to enable DoH or DoT.
- For AX and BE series, refer to the screenshots below.
- For AC models, refer to this screenshot:
Note: There are 3 built-in DoH Servers: dns.quad9.net, dns.google, and cloudflare-dns.com, you can choose one at a time.
For more details about the DoH and/or DoT configuration, please refer to How to Configure DoH/DoT on a TP-Link Wireless Router.
Comment below if you have any feedback or run into any issues — we’re here to help.
Related Articles:
Pre-Released Firmware Supports DoH and IoT Network for Archer C80 is Ready for Trial
What is DoH and How to use it on TP-Link Wi-Fi Routers?
How to Configure DoH/DoT on a TP-Link Wireless Router
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
ZandaaTV wrote
@Kevin_Z The archer c80 page has not been updated to have the latest firmware. Thank you!
@ZandaaTV I just found you're all reporting the same. The latest official 1.13.1 version should have been publicly released for both EU and US versions, please check for the updates on your router web GUI or via the Tether App.
- Copy Link
- Report Inappropriate Content
@Kevin_Z mine says that the firmware is up to date but the watermark is still there and the us version is not on the webpage
- Copy Link
- Report Inappropriate Content
Maybe the local website admin has not yet published it. You can use the following link to download and install it manually:
https://static.tp-link.com/upload/firmware/2023/202308/20230814/Archer C80(US)_V2.2_230609.zip
- Copy Link
- Report Inappropriate Content
@Kevin_Z I've just been able to update my main and satellite C80 routers in France .. thank you
- Copy Link
- Report Inappropriate Content
Thank you very much for the update. Please do let me know if there is anything new that comes up.
- Copy Link
- Report Inappropriate Content
@Kevin_Z I have no lost OneMesh visibility to my TL-WPA8635P V3 ... have commented in the feature update section.. thanks
- Copy Link
- Report Inappropriate Content
To understand this routing paths, this chapter briefly explores the fundamentals of IoT-to-cloud networking pathway which is divided in the following.
- Copy Link
- Report Inappropriate Content
Does the new FW version (1.13.1 Build 230609) solve the not working "Hide SSID" / bug , which makes the Satellite Router transmite the SSID although configured to be hidden
following this forum reported issue:
https://community.tp-link.com/en/home/forum/topic/593722?replyId=1172728
Was it implemented on the Guest network SSID as well ?
Is there a more detailed Version Release description ?
- Copy Link
- Report Inappropriate Content
Thank you very much for asking.
I confirmed with the developers, this 1.13.1 official release doesn't include the optimization you mentioned about the hide SSID and Guest Network. The new features and bug fixes could be all that we can find in the firmware release note.
- Copy Link
- Report Inappropriate Content
@Kevin_Z is there anything to to worried about? I am getting a lot such steam code logs on C64 Firmware Version: 1.13.1 Build 230609 Rel.32076n(5553)
I have Reliance Jio router as main router (India) 192.168.29.1, than made C64 as main router again via NAT (192.168.0.1) to use DoH and than two access point (IP- 0.2 & 0.3) connected to it using wired backhault (AX10 v2 & A6 V3).
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 29646
Replies: 105