New Release Wi-Fi Routers Support DoH and DoT Network
Good news!
We are happy to announce that there is new official firmware rolling out for multiple routers, including the BE, AX, and AC series, which adds DoH and/or DoT. Welcome to upgrade and install this version of firmware to try it out.
This Article Applies to:
| Model & Hardware & Firmware | DoH | DoT | Update Date |
|---|---|---|---|
| Archer BE11000 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE700 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE550 Pro_V1&V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE3600_V1_1.1.0 Build 20240729 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE230_V1&V1.6_1.1.0 Build 20240729 and newer versions | √ | √ | Sep 2, 2024 |
| Archer AX55(EN)_V1_1.3.3 Build 20240628 and newer versions | √ | √ | Aug 16, 2024 |
| Archer AX55(US/CA/TW)_V1_1.3.2 Build 20240325 and newer versions | √ | √ | -- |
| Archer C80_V1&V2.20_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C6_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A6_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C64_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A64_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C86_V1_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A8_V1&V2.20_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C59(US)_V4&V4.8_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer AC1900(US)_V1.6_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Moderator Note:
1. The availability of DoH and/or DoT may vary by region even for the same model. Please check your local website for more information.
2. The above list might not include all models and hardware versions. It is recommended to keep watching the firmware releases for your router, as all the newly supported features will be listed in the patch notes if/when it is added to your version.
3. DoH would not be available when the router works in Access Point mode. Visit this FAQ to know more about the difference between Access Point Mode and Router Mode.
Introduction and Configuration
DoH/DoT Introduction
DoH (DNS over HTTPS) and DoT (DNS over TLS) are two methods that enhance the security and privacy of DNS queries in network communications.
DoH encrypts DNS queries within HTTPS traffic, making them indistinguishable from regular web traffic and difficult to monitor.
DoT uses a dedicated TLS connection for DNS messages, ensuring they are secure from eavesdropping and tampering.
DoH/DoT Configuration
You can go to Advanced > Network > Internet page to enable DoH or DoT.
- For AX and BE series, refer to the screenshots below.
- For AC models, refer to this screenshot:
Note: There are 3 built-in DoH Servers: dns.quad9.net, dns.google, and cloudflare-dns.com, you can choose one at a time.
For more details about the DoH and/or DoT configuration, please refer to How to Configure DoH/DoT on a TP-Link Wireless Router.
Comment below if you have any feedback or run into any issues — we’re here to help.
Related Articles:
Pre-Released Firmware Supports DoH and IoT Network for Archer C80 is Ready for Trial
What is DoH and How to use it on TP-Link Wi-Fi Routers?
How to Configure DoH/DoT on a TP-Link Wireless Router
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@tonyjp2022 Hello but as I see with my AX10 newest ver I see on tp-link.com it just a update for improve performance and dont have a DỌH or dot support like u said
- Copy Link
- Report Inappropriate Content
@PhanLucHoa where can i get the current beta firmware for the ax 10 i gladly upgrade
- Copy Link
- Report Inappropriate Content
@tonyjp2022 Hi, I dont know where I can download beta firmware but if u have a beta version that support doh feature on AX 10 v1 can u please share it to me ? Thanks
- Copy Link
- Report Inappropriate Content
@Kevin_Z When the DoH feature is coming to AX53 routers?
- Copy Link
- Report Inappropriate Content
Hi, we don't have advanced notice when DoH will come to Archer AX53 yet, once there is any update, we will update this thread.
Please pay attention to this thread and also the firmware update on the router web interface.
- Copy Link
- Report Inappropriate Content
Model: Archer C6
Hardware Version: V3.2
Firmware Version: 1.0.16 Build 20230828 rel.44667
It's been so long we are still waiting, V3.2 is one of the best seller in Indian region.
I am writing to request for the urgent implementation of DNS over HTTPS (DoH) support for your router. As one of the top-selling routers in India and also the best-rated one, I believe that enabling this feature will greatly benefit your customers in terms of security and privacy.
DoH is a protocol that encrypts DNS queries and responses, making them more secure against interception and manipulation by third parties. With the increasing prevalence of cyber attacks and surveillance, it is important that users have access to this feature to protect their online activities.
I urge you to consider this request and prioritize the implementation of DoH support for your router. Thank you for your attention.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Do you know when DoT/DoH support will be added to the Archer GX90? This is not a cheap modem, and the TP-Link firmware support is 💩! Please chat with the software team and any project manager to determine when the requested support will be added to the Archer GX90. We are patinte but we are not going to be siting here waiting for months hopping to hear back from support!
- Copy Link
- Report Inappropriate Content
Bought an Archer AX53 (v1) a few days ago, and I was happy to see it has Device Isolation for IoT devices, but I was pretty disappointed when I could not find DoH.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 29693
Replies: 105
Voters 3
