Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Sunshine wrote
Hi, upon checking with our engineers, our EasyMesh routers implement EasyMesh R2, and R2 doesn't require 802.11r compulsorily, thus our EasyMesh routers do not support 802.11r.
Sunshine thanks four your answer. Could you ask if 802.11r support is planned? I was having roaming issues with my iPhone 14 Pro, I think Fast Roaming (802.11r) could be a really good feature for this router
- Copy Link
- Report Inappropriate Content
@Sunshine I have been long awaiting the update for ethernet backhaul and installed the firmware update an my two AX55. Now all my routers are running beta firmwares ;-)
My setup is as following:
AX73 (192.168.1.1) = AX55 (192.168.1.115) = AX55 (192.168.1.126) (connected in series)
+
RE330 (wireless)
All are set-up for easymesh without AP.
Unfortunately the system remains highly unstable. For a short while the system seems to work, then the satellite routers become unavailable. While some connected devices might still get Network access, the routers cannot be accessed and some not. I noticed that especially the 2.4GHZ network has trouble.
Rebooting the routers only has a short time effect, and it is unclear from which device the issue originates.
Happy to share log files, if it leads to more stable system in the future.
Could you guide what changes should be made to fix the setup so it can run stable atm?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
But did you reset router to default settings and after try update? :)
- Copy Link
- Report Inappropriate Content
@Sunshine I noticed that with a cold reboot of the router, all of my DHCP address reservations are disabled. I always need to manually enable every reserved address one by one. Is this normal behavior? This has been an issue since the last stable firmware and I'm using the latest beta right now..
- Copy Link
- Report Inappropriate Content
Wow! This actually worked. I had to reset to factory settings and use cable to be able to upload but now it worked like a charm! Thanks alot 😊
- Copy Link
- Report Inappropriate Content
Hello,
Sorry for asking this here as it is not related to the product (AX55).
AX53 will get update to support these features?
- Copy Link
- Report Inappropriate Content
Hi i notice other problem.
I had setup schedule restart/reboot every week.
Today after automatic restart/reboot, main router go crazy.
1hour or something after restart/reboot network become unstable.
Internet start keep disconnecting and connecting devices and easymesh.
I cannot log in into web interface to check out bec system popup some error message.
Router become heat very much (when i touch it become more hot then usually) and after sometime restart alone.
After that "self reboot" all start works fine as before and i catch only part of system logs.
I added it in the attachment.
- Copy Link
- Report Inappropriate Content
I had flashed 1.2.6 beta and then flashed the public 1.2.5 and my router became a mess.
The main issue seems to be that the DHCP server dies, so every day when I turn on my PC I get a 169.254. address.
If I do "ipconfig /renew", after a while I'll get an error saying that the attempt to connect to the DHCP server timed out.
Also, the router's bootup time is NOTICEABLY longer than it used to.
I tried factory resetting but that didn't help.
For the time being I'll go back to 1.2.6, but just thought I'd bring this up.
- Copy Link
- Report Inappropriate Content
Did you try just push reset button or back to default factory settings? and after it load again firmware what you want? :)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 65160
Replies: 303