Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, actually the backhaul WiFi will not be disabled when you disable main WiFi on the routers, as the backhaul WiFi is only used for establishing mesh network.
We have run the same tests on our end for many times and cannot reproduce the issue, so may I know your detailed network topology?
ISP modem--Main AX55---Satellite AX55, or ISP modem--Main AX55--Switch--Satellite AX55 are both not working for Ethernet Backhaul? And is there any other network devices in the network?
By the way, please also refer to this thread to see if the steps to build Ethernet Backhaul is correct or not: How to Build an Ethernet Backhaul Using Two EasyMesh Routers
- Copy Link
- Report Inappropriate Content
Thanks, once I finally got the wired icon with the direct connection I was able to troubleshoot from there. The issue was in a D-Link switch between the main router and the satellite router. All up and running smooth now! Now with the good switch my network speed on that network back up to 110%. Thanks!
- Copy Link
- Report Inappropriate Content
shakeyhome wrote
Thanks, once I finally got the wired icon with the direct connection I was able to troubleshoot from there. The issue was in a D-Link switch between the main router and the satellite router. All up and running smooth now! Now with the good switch my network speed on that network back up to 110%. Thanks!
Glad to hear that you've located and solved the issue, hope you could enjoy the internet with our products!
- Copy Link
- Report Inappropriate Content
Did you have to remove the switch to get it to work, or was it a config change?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Does that mean that in order to have a ethernet backhaul for satellite device, we will have to directly connect it with the main router? based on the issue from @shakeyhome
- Copy Link
- Report Inappropriate Content
I replaced the switch with a different brand and everything immediately worked as it is supposed to.
The original was D-Link. I had a Netgear switch available so I used that one.
- Copy Link
- Report Inappropriate Content
No, but some switches aren't compatible with the Ethernet backhaul, the exact protocol or something. I read somewhere TP-Links work, I had a Netgear handy so I tried it and it worked. That's not to say every one from that brand would work. But the one I had handy did. It's just something to look for if you're having issues.
- Copy Link
- Report Inappropriate Content
@shakeyhome hi mind to share what's your topology? issit main router <-> switch <-> satellite device?
- Copy Link
- Report Inappropriate Content
Awesome, thanks for letting me know.
Edit: Spotted your response about switches having issues with backhaul, I had issues with Deco's on my Netgear, so it seems a bit hit and miss.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 64112
Replies: 303