Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
RobyA wrote
You are right: I made a mistake.
But the problem remains: with the beta firmware the VPN client configuration do not work (at least with OpenVPN)
Hi, may I have a screenshot of your OpenVPN Client settings and also the error message?
Except for internet access, is there anyn other configurations such as easymesh etc.? Or please share with us the configuration file along with the login password via private message, we will try running the same tests on our end to see if it can be reproduced.
- Copy Link
- Report Inappropriate Content
felichs wrote
@Sunshine
I would like to report an issue that I'm having using the AX55 with the 1.2.6 Build 20231130 rel.74059(4555)
I'm using the AX55 as a router and connected a RE6000XD using the EasyMesh feature.
The extender is connected using the Ethernet-Backhaul.
As soon as the RE6000XD is configured and forms a Mesh with the AX55, the WiFi on my Iphone SE 2020 (iOS 17.2.1) keeps disconnecting in a ~ 20s interval.
Before I configured the Mesh, it was connecting fine with the AX55.
The moment I unplug the extender, it works again.
I also tried with the RE335 instead of the RE6000XD as the extender, however with the same result.
My PC does not seem to have any Problems.I would thus assume that it is an issue with either the AX55 or with the iPhone, or a combination of both.
Any suggestions on how to resolve this issue would be very much appreciated?
Update:
Today I observed another problem, which I don't know if it is related to the above mentioned.
First the extender did not get any internet and my PC that previously worked with the AX55 would now only connect to the extender, even if the AX55 is way closer.A restart of the extender fixed the internet connectivity problem of the extender.
However now the AX55 does not show any client connections or mesh devices in the network tab and in the Advanced -> EasyMesh tab, EasyMesh is shown as OFF, even though the extender seems to connect fine.
Hi, upon checking, RE600XD and RE335 don't support EasyMesh Ethernet Backhaul, they could only establish the mesh network via wireless backhaul, thus when you build the mesh network and also connect it to the main router via Ethernet cable, there will be a network loop which will cause issues, thus please disconnect the Ethernet cable between the extender and the router, then test if everything works fine via wireless backhaul.
- Copy Link
- Report Inappropriate Content
Now I reinstall the old firmware version that works.
I will install again the beta version and give you a screenshot but the error was simply "Operation failed" without other information. The same open vpn files are correctly loaded the the current official firmware.
I can send the openvpn files (.ovpn and .crt) to test it; the error was present saving the record (it's not necessary to insert user and password). How can I send to you via private message?
Thanks.
- Copy Link
- Report Inappropriate Content
RobyA wrote
Now I reinstall the old firmware version that works.
I will install again the beta version and give you a screenshot but the error was simply "Operation failed" without other information. The same open vpn files are correctly loaded the the current official firmware.
I can send the openvpn files (.ovpn and .crt) to test it; the error was present saving the record (it's not necessary to insert user and password). How can I send to you via private message?
Thanks.
Hi, please save a backup file on Advanced->System Tools->Backup&Restore, you could upload the file to google drive etc. and send me the download link via private message.
- Copy Link
- Report Inappropriate Content
Ok. I will install again the beta firmware and send you the backup.
- Copy Link
- Report Inappropriate Content
I am still experiencing serious issues when having more than two routers in the system
- Ethernet backhaul star configuration
AX73
/ \
AX55 AX55
creates network instabilities
- Ethernet backhaul daisy chain
AX73 - AX55 - AX55
creates network instabilities
- two device config
AX73 -- AX55
prevents some device of connecting to AX55 via 2.4 Ghz
I hope we can get a fix for this very soon. thank you,
- Copy Link
- Report Inappropriate Content
My problem is the same but in my case AX73 is main router and only 1 router is AP (AX55) .
Please we need new firmware this beta its a crab and the network goes down very shourtly after reboot both routers.
Something wrong with this beta I dont know why the support delays that issue and doesnt reply.
- Copy Link
- Report Inappropriate Content
@sunshine
Could you clarify whether the issues we are experiencing are due to failures in the AX73 or the AX55?
Would it make sense to change AX55 to master and have the others as satellite?
- Copy Link
- Report Inappropriate Content
Im really pi$$ed with TPLink routers.Completly regreting for throwing money and the routers cant do the simple job that they are made for
.
The support is absolutly rubbbish.Why the **** you selling routers whose not working and putting things that are incorrect and misleading on the label ???
I could get ASUS with mesh and would forgot I have routers.. ba*t*rds
serengeti wrote
@sunshine
Could you clarify whether the issues we are experiencing are due to failures in the AX73 or the AX55?
Would it make sense to change AX55 to master and have the others as satellite?
- Copy Link
- Report Inappropriate Content
serengeti wrote
I am observing similar issues as @felichs
My main router is a ax73 and a ax55 is connected as satellite with Ethernet backhaul. The latest beta is running on both routers.
Multiple devices (I do not have an iPhone) do only connect intermittently to the WiFi when in range of the ax55. They keep resetting the connection every ~20s . When close to the main router ax73 they work again normally.
I can't identify a common pattern on the devices that don't work, other than they have only 2.4Ghz . On of them is the Shelly uni. Another the lightmanager air.
Hi, does this issue happen with smartphones and laptops? And is there the same issue if you disable EasyMesh and use the AX55 as regular AP mode or use the same configuration on previous firmware of the AX55?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 64964
Replies: 303
Voters 6
