@Kevin_Z 

My PC is always connected directly to the main router by Ethernet. :) I use a 1TB SSD disk in exFAT format. It's the same as what I used with BE550v1 before when it was connected as the main.

About the error, I will send you later when I'm back home.

 Is this correctled in firmware ? ipv6 ICMP security issue: https://community.tp-link.com/en/home/forum/topic/722116?page=1

  @Kevin_Z 

i found out when you switch selctect folders and subfolders, router give a error after you try save changes.  

and after refresh page all changes are applied already even before showing an error lol.

I notice when i cant send anything to usb storage after do changes, when I seftly remove device and refresh.

The file transfer to storage is working good again.

  @Kevin_Z 

OK again problem start appear when i unslected some folders:

When i try send file to device showing error "device is full and i need more free space" :D

But when i select again all subfolders, sending files with no problem :)

  @Kevin_Z 

Till now have no complains, all issues here I will test again, cause I did from scratch. I've BE800 with 2x AXE75 (Easymesh) wired, why wired, cause I never good get any good performance when doing wireless, but then again maybe cause of the 2x Easymesh AXE75 which tops at WiFi6e and not 7.

Now I asked before and still don't see it :
- Easymesh devices manual update please, now I have router at .254 address, so I can do them manual by remove first.
- DHCP rename/modify device and plz create sorting, cause this is not to work with when you have around 60 devices.

- To be honest create sorting in all kind of lists

- When clicking on clients I don't see offline devices, but on Tether app they are.

- Like I've a wired IKEA Tradfri Gateway, how do you put this one in IoT?

- Samba share I had ASUS before, why only a user and admin, very cheap, with ASUS I could create home drives, now I don't use and have Raspberry PI extra.

- Why even when you have IoT or Guest, please use VLANs, I don't like the fact that they are in same range, now I've the feeling, do I trust this.

- Then this : Authorize Third-Party Services (Once enabled, we will share your clients' information to a third-party services to identify your clients better. We won't save your private information), We won't save, but do you share it? Is this within all guidelines of regulations? I think you've to show that also on that page.

This something same like the addons you've to buy, I all had on my ASUS for half the price, how can this be? Of course it is not only with this model, but TP-Link not really looking around and not listening to customers.

  @Kevin_Z 

i CANNOT access the usb-drive via smb with the be800 and with my windows 10 pc, i get networkerror 1208 after entering the credentials.

with the SAME window 10 pc accessing usb storage via usb works just fine on a different older wifi router (fritzbox 7490).

BUT i can access the usb storage with "some" other devices and software on be800 via smb.
for example: with meta quest 3 with skybox player I CAN access usb-storage via smb.
pico 4 with moonplayer CANNOT acces usb-storage via smb on be800 but with 4xvr player, pico 4 CAN access usb storage on be800.

summary:

so it is all over the place, sometime it works on BE800 sometimes not but ALL my devices can access the usb-storage via smb from my other older wifi router (Fritzbox 7490). izt looks like that the fritzbox does something more compatible with accessing usb storage via smb.

here is my smbclientconfiguration from the windows 10 pc (firewall has been turned off).


in eventvwr i get infos, that the smbserver does not support multichannel (probably not important) and an error in security:
translated:

Explanation: This error indicates that SMB messages are being modified as they travel across the network from server to client. This could be due to session termination on the server, a problem with the network, a problem with a third-party SMB server, or a man-in-the-middle attack attempt.


please keep in mind: i did not made a test if a "non-beta firmware" works better for accessing the usb-storage via smb and windows 10 but this beta will be the stable firmware in the future, right? so it should be fixed anyway....