Archer AX53 & AX58 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More

Archer AX53 & AX58 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More

Archer AX53 & AX58 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Archer AX53 & AX58 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday - last edited Tuesday
Model: Archer AX53   Archer AX58  
Hardware Version: V1
Firmware Version: 1.3.1 Build 20241120

We’re excited to announce the pre-release of the Archer AX53/AX58 V1 firmware update, version V1.3.1. This update introduces a host of new features, performance enhancements, and security improvements for a smoother and more reliable network experience. Below is a summary of the key updates.

 

This Article Applies to:

Archer AX53 V1

Archer AX58 V1

 

New Features and Modifications:

  • EasyMesh Ethernet Backhaul

The new firmware introduces full EasyMesh support, enabling seamless integration between multiple devices for consistent coverage across your home. The addition of Ethernet Backhaul ensures more stable and faster connections by allowing mesh nodes to connect via wired networks, alleviating congestion on Wi-Fi bands and improving overall network performance.

 

  • VPN Client and WireGuard Support

This update adds VPN client functionality with the inclusion of the WireGuard protocol, allowing users to set up and manage their VPN connections directly from the TP-Link router. This enhances privacy and provides faster speeds for your internet browsing.

*Note: L2TP/IPSec client support is not included.

 

  • IoT Network Segmentation

A major addition to this update is the IoT Network feature. This allows you to manage your smart devices more effectively by isolating them from the main network. This improves both the security and performance of your network, keeping your primary network efficient and less congested.

 

  • Local DNS Server Configuration

With this update, users can now configure local DNS servers directly in the WAN/Internet settings page. This flexibility allows you to select DNS providers that best suit your privacy and performance needs, bypassing default ISP settings. This can result in faster browsing speeds and enhanced security.

 

  • Advanced AP Mode

AP mode now includes a range of advanced features, such as wireless scheduling, access controls, and enhanced device management. This gives users more flexibility to control their network setup, allowing for easy configuration of security settings, parental controls, and device monitoring, even in access point mode.

 

  • Flow Control Switch

For advanced users, a new Flow Control ON/OFF switch has been added under Advanced > Network > LAN > Flow Controller. This feature allows more granular control over network traffic management.

 

  • More Enhancements

  • Enhanced device stability.
  • Enhanced device security.
  • Improved the accuracy of client identification with Fing Integration.

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!

(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.

(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.

(4) This pre-release firmware for Archer AX53/AX58 V1 can be applied to all versions (EU/US/TW/etc.).

(5) This version of software can be degraded to the previous version.

 

Direct Firmware Download link: 

Archer AX53&AX58_V1_1.3.1 Build 20241120 (Pre-release Software)

 

 

Additional Information

As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.

  • Model and firmware version of your router.
  • Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.

 

 

Related Articles:

How to Build an Ethernet Backhaul Using Two EasyMesh Routers

How to set up WireGuard VPN on TP-Link wireless router

How to set up IoT Network on TP-Link wireless router

Introducing Fing Integration: Enhanced Client Recognition for Archer Routers and Deco Mesh Systems

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  4      
  4      
#1
Options
13 Reply
Re:Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday - last edited Tuesday

  @Kevin_Z it seems that Christmas has come early, thank you so much TP-Link team!! Btw does this update also add DoH, DoT, and Fing?

  0  
  0  
#2
Options
Re:Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday

@Char-lie 

Thank you for your interest and quick response. Merry Christmas.laugh

 

The pre-release firmware includes Fing but does not support DoH/DoT.

 

I've updated the modifications in my original post.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  2  
  2  
#3
Options
Re:Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday
I see, tysm! I hope the pre-release is bug free. If there is a bug where could I send a report and how to downgrade the firmware after updating to this version? (Just in case) my current version is ax53v1 (US) 1.2.4 Build 20240509 rel.64683 (got it from OTA update) and I can't find the firmware file anywhere, my local website is 1.2.2 thanks in advance!! p.s. how to backup the config?
  0  
  0  
#4
Options
Re:Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday
where Download link?
  0  
  0  
#5
Options
Re:Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday

 

dizh wrote

where Download link?

 

@dizh 

 

The download link is updated in the thread now. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  2  
  2  
#6
Options
Re:Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday

  @Kevin_Z could you share the firmware update file for ax53v1 (US) Version 1.2.4 Build 20240509 rel.64683, just in case I need to rollback.

  1  
  1  
#7
Options
Re:Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday

 

Char-lie wrote

  @Kevin_Z could you share the firmware update file for ax53v1 (US) Version 1.2.4 Build 20240509 rel.64683, just in case I need to rollback.

 

@Char-lie 

 

Here it is:

Archer AX53(US)_V1_1.2.4 Build 20240509 (Official Firmware)

 

If unfortunately, you encounter any issues after installing the pre-release firmware on the Archer AX53 V1, you can refer to the firmware recovery instructions to install the official firmware on your router.:

TP-Link Router Firmware Recovery Guidance

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  3  
  3  
#8
Options
Re:Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday

  @Kevin_Z it seems to be working fine, love the new web ui. Thanks TP-Link team!! Also merry Christmas!

  2  
  2  
#9
Options
Re:Archer AX53 & AX58 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Tuesday - last edited Wednesday

  @Kevin_Z All the features included in this pre-release software are working for me in Archer AX53 V1 (US).

Kevin_Z wrote

We’re excited to announce the pre-release of the Archer AX53/AX58 V1 firmware update, version V1.3.1. This update introduces a host of new features, performance enhancements, and security improvements for a smoother and more reliable network experience. Below is a summary of the key updates.

 

This Article Applies to:

Archer AX53 V1

Archer AX58 V1

 

New Features and Modifications:

  • EasyMesh Ethernet Backhaul

The new firmware introduces full EasyMesh support, enabling seamless integration between multiple devices for consistent coverage across your home. The addition of Ethernet Backhaul ensures more stable and faster connections by allowing mesh nodes to connect via wired networks, alleviating congestion on Wi-Fi bands and improving overall network performance.

 

  • VPN Client and WireGuard Support

This update adds VPN client functionality with the inclusion of the WireGuard protocol, allowing users to set up and manage their VPN connections directly from the TP-Link router. This enhances privacy and provides faster speeds for your internet browsing.

*Note: L2TP/IPSec client support is not included.

 

  • IoT Network Segmentation

A major addition to this update is the IoT Network feature. This allows you to manage your smart devices more effectively by isolating them from the main network. This improves both the security and performance of your network, keeping your primary network efficient and less congested.

 

  • Local DNS Server Configuration

With this update, users can now configure local DNS servers directly in the WAN/Internet settings page. This flexibility allows you to select DNS providers that best suit your privacy and performance needs, bypassing default ISP settings. This can result in faster browsing speeds and enhanced security.

 

  • Advanced AP Mode

AP mode now includes a range of advanced features, such as wireless scheduling, access controls, and enhanced device management. This gives users more flexibility to control their network setup, allowing for easy configuration of security settings, parental controls, and device monitoring, even in access point mode.

 

  • Flow Control Switch

For advanced users, a new Flow Control ON/OFF switch has been added under Advanced > Network > LAN > Flow Controller. This feature allows more granular control over network traffic management.

 

  • More Enhancements

  • Enhanced device stability.
  • Enhanced device security.
  • Improved the accuracy of client identification with Fing Integration.

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!

(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.

(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.

(4) This pre-release firmware for Archer AX53/AX58 V1 can be applied to all versions (EU/US/TW/etc.).

(5) This version of software can be degraded to the previous version.

 

Direct Firmware Download link: 

Archer AX53&AX58_V1_1.3.1 Build 20241120 (Pre-release Software)

 

 

Additional Information

As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.

  • Model and firmware version of your router.
  • Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.

 

 

Related Articles:

How to Build an Ethernet Backhaul Using Two EasyMesh Routers

How to set up WireGuard VPN on TP-Link wireless router

How to set up IoT Network on TP-Link wireless router

Introducing Fing Integration: Enhanced Client Recognition for Archer Routers and Deco Mesh Systems

The VPN client works through the Wireguard protocol.

 

For DNS it is necessary that the IP configuration is selected as dynamic IP.

 

In my case it was not possible to revert to the latest official firmware version.

 

Overall it is stable at the moment, the router works fine only the DoT / DoH feature is missing in my opinion it is more secure and modern protocol, I hope it can be implemented in the official version. As always thank you very much for the hard work of the developers for our devices and to all the team for always listening to the community. Happy rest of the day.

  3  
  3  
#10
Options
Re:Archer AX53 & AX58 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
Wednesday

@Char-lie   @Jeffsa12 

Thank you both for your valuable feedback. I'm happy to hear that the pre-release firmware works fine so far with the new features.laugh

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#11
Options