Beta Software Enhance the Overall 5G network stability for Deco X50-5G/Archer NX200/NX500/NX600
This Article applies to
Deco X50-5G_V2, Archer NX200_V2, Archer NX600_V1
Any issues related to Deco X50-5G_V1, please make sure your firmware is up-to-date: Deco X50-5G-1.2.1 Official Now Available for Installation!
Firmware Modification:
- Fixed the issue that the 5G network randomly dropped out, and a reboot was needed to restore the internet connection.
- Improved overall network stability
Download Link:
| Deco X50-5G_V2 | Deco X50_5G_V2_1.1.0_Official |
| Archer NX200_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer NX200_V2 | Archer NX200_V2_1.1.0_20250616_Beta |
| Archer NX500_V1 | Archer_NX500_V1_1.0.0_20250616_Beta |
| Archer NX600_V1 | Archer NX600_V1_1.1.0_20250616_Beta |
| Archer NX600_V2 | Archer_NX600_V2_1.0.0_20250616_Beta |
Update Advice:
- Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
If the beta firmware didn't help, please comment below with your SIM service provider. We'll get in touch as soon as possible.
Related Articles:
Archer NX200 Can't Access Certain Websites or Only Receives an IPV6 Address
464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @David-TP
I would like to know if the latest firmware for the Archer NX600 has the features and stability included in this beta so that there is no need to use this beta firmware ?
Thank you in advance and BR
- Copy Link
- Report Inappropriate Content
Hi again @David-TP
I also have some questions as using my phone and similar SIM I have an excellent reception of 5G (> 250 Mbit/s) however using the Archer NX600 I don't have a good reception and performance : It is always disconnecting and the performance is below 100 Mb/s. Could you please help ?
Thank you in advance and KR
- Copy Link
- Report Inappropriate Content
Hello,
I am a user of the TP-Link Archer NX200 V2 router and I am experiencing the exact same issue mentioned in your post.
I am located in Saudi Arabia, and my Internet Service Provider is STC.
When I manually set the router to "5G Only Mode", the device completely loses its internet connection and stops working. This forces me to return to "Auto Mode" to be able to use it.
Do you have any updates regarding the official firmware update release date that will permanently fix this issue, or could you provide me with the specific Beta Firmware you mentioned?
Thank you very much for your efforts.
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
I think the STC might use 5G NSA, while the "5G only" mode on the Archer NR routers only works with 5G SA SIM cards:
Do Archer/Deco 5G routers support 5G SA and NSA?
Best regards.
- Copy Link
- Report Inappropriate Content
Hi,
Has the fix from the beta version
NX600_V1_1.1.0_20250616_Beta been included in the official firmware 1.2.0 Build 250806? My Archer NX600 restarts spontaneously at random times during the day and night. Best regards,
Stevald
- Copy Link
- Report Inappropriate Content
Hello
I have no answer of my messages #66 et #67 more than one month ago, could you please comment on it ?
It looks like there is a strong issue of stability and the support isn't helping us very much.
Thank you in advance
- Copy Link
- Report Inappropriate Content
Hi, nice to see you again.
May I know your SIM ISP? How about the current firmware version on the Archer NX600?
Before Archer NX600, did you use any other mobile routers before?
How about the network stability and speed when the "Network Mode" on the Archer NX600 is set to "4G only"?
Smartphones are high-volume consumer products that receive the latest modem technology first. Many mobile routers use modems that are technically two years or more behind flagship smartphones. Moreover, smartphones also perform better in consideration of Carrier Aggregation. They generally support higher "UE Categories," allowing them to "combine" more frequency bands simultaneously for a wider, faster data path.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thanks a lot for your time and patience.
Is your current firmware version Archer NX600(EU) 2.0_1.2.0 3.0.0 v60ec.0 Build 250806 Rel.41198n?
Have you observed any LED changes during the reboot?
How often would the Archer NX600 restart itself?
By the way, may I know your SIM ISP?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 12617
Replies: 64
Voters 1
