Home Network Community > Deco > Deco XE75 V1 vs V3
< Deco

Deco XE75 V1 vs V3

Deco XE75 V1 vs V3

Deco XE75 V1 vs V3
Deco XE75 V1 vs V3
2025-07-28 23:52:36
Tags: #Network Connectivity #Connection Preference #Installation
Model: Deco XE75  
Hardware Version: V3
Firmware Version: 1.4.t on V1 & 1.214 on V3

Just a quick question.

 

I have had the V1s few years now and been very happy in WiFi router mode.  I had a little dead spot in the far corner of the house so the son bought a 3 pack of V3s for $200AUD.  Great price.  I have hooked one up as the main router instead of the V1 which was being used thinking newer=better, but after a bit of reading found that the hardware in V1 might be better suited to being the router and not the newer V3.  Info is pretty vague so my hunch is there will be no difference, but thought I'd ask

  1      
 
  1      
 
#1
Options
5 Reply
Re:Deco XE75 V1 vs V3
2025-07-29 08:53:46

  @Willyeckerslike 

Hi, it is recommended to use V1 as the main Deco.

The current firmware version of V1 has introduced more features than V3(V3 will be supported later), such as 

Matter

APP block/App Time Limits under the Advanced Parental Control subscription

Camera Security

 

Whitelist/ Wi-Fi Access Control

ECO Mode(Wi-Fi Schedule)

The last two features will need the support of all Deco units in the Mesh network.

Best regards.

 

 

 

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco XE75 V1 vs V3
2025-07-29 08:58:42

  @David-TP 

 

Thanks David.

  0  
  0  
#3
Options
Re:Deco XE75 V1 vs V3
2025-07-30 08:22:44

  @David-TP 

 

Hi David, Just FYI I changed it around so a V1 XE75 is the main router and as soon as I added a V3 Matter support and the other features you mentioned all disappeared including Mu-Mimo ( which I believe is enabled now by default)

  1  
  1  
#4
Options
Re:Deco XE75 V1 vs V3
Tuesday

  @David-TP V3版白名單功能啥時能出呢

David-TP wrote

  @Willyeckerslike 

Hi, it is recommended to use V1 as the main Deco.

The current firmware version of V1 has introduced more features than V3(V3 will be supported later), such as 

Matter

APP block/App Time Limits under the Advanced Parental Control subscription

Camera Security

 

Whitelist/ Wi-Fi Access Control

ECO Mode(Wi-Fi Schedule)

The last two features will need the support of all Deco units in the Mesh network.

Best regards.

 

 

 

 

 

  1  
  1  
#5
Options
Re:Deco XE75 V1 vs V3
Wednesday

  @jackywu 

Hi, welcome to the community.

I/m afraid there hasn't been any clear news about this specific firmware. It is still on the plan but the engineers would prefer not to offer an ETA unless this version is around the corner.

Deco XE75 V2 and V3 Firmware update schedule should be consistent. I think it probably needs to be updated to the 1.4.x firmware.

Thank you very much for your time and patience.

Best regards.

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options

Information

Helpful: 1

Views: 396

Replies: 5

Tags

Network Connectivity Connection Preference Installation
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.