My Tapo security camera c110 and my smart plug does not work.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

My Tapo security camera c110 and my smart plug does not work.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

moe-B14

2025-08-04 03:11:00 - last edited 2025-08-15 08:48:27

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2025-08-04

My Tapo security camera c110 and my smart plug does not work.

2025-08-04 03:11:00 - last edited 2025-08-15 08:48:27

Tags: #Device Connectivity

What do I do here? My security camera was working just fine until I had to remove the Ethernet connection for a bit. After that my security camera does not get identified by Ethernet, or WiFi or blue tooth. Tried resetting camera several times, tried checking the 2.4 ghz to see if it working fine, checked the firmware updates, reinstalled my Tapo app. What else should I do? The Tapo devices in my opinion are too dainty. Same issue happened with my Tapo smart plug. They need to do better.

1 Accepted Solution

Solla-topee

2025-08-05 03:18:16 - last edited 2025-08-15 08:48:27

Posts: 19282

Helpful: 3122

Solutions: 4396

Stories: 11

Registered: 2020-05-19

Re:My Tapo security camera c110 and my smart plug does not work. -Solution

2025-08-05 03:18:16 - last edited 2025-08-15 08:48:27

@moe-B14

Hi,
If your camera Tapo C110 can't be configured successfully, please try the following steps.

1. Please make sure your router's 2.4G Wi-Fi network is working. If not, please contact your router support.
2. Remove the camera from the Tapo app. Press the reset button on the camera for 10 seconds to perform a factory reset.
3. Reconfigure the camera by referring to the instructions "How to set up the Tapo camera".
4. If you fail to set it up, please refer to the instructions "What should I do if I fail to configure Tapo Camera?" to troubleshoot.

If the camera still can't be set up, please let me know the error message you encountered during configuration and the troubleshooting you did.

Best Regards

>> Smart Home: Introduction to Common Smart Action Scenarios for Tapo Cameras >> Tapo Camera Day/Night Mode Selection Guide: Best Settings Recommendations for Different Scenarios >> Enhance Your Tapo App Experience: Introduction to Several Practical Features >> Troubleshooting for Tapo Camera's Privacy Mode Automatic Activation

My Tapo security camera c110 and my smart plug does not work.

My Tapo security camera c110 and my smart plug does not work.

Information

Voters 0

Tags