Beta Software Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN
Hey Everyone,
We’re excited to introduce a new firmware update for the Deco X50/X55_V1.30/V1.33, packed with powerful new features and enhancements designed to elevate your Deco Mesh Home Networking experience.
This Article Applies to:
Deco X50(US/KR) / Deco X55(US/CA)_V1.30/V1.33
Modifications and Enhancements:
New Features
- Supported Channel Selection.
- Supported Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
- Added DoH/DoT under Deco APP>More>Advanced.
- Supported 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.
- Supported WireGuard VPN Server/Client.
- Supported built-in easy configuration of NordVPN/Surfshark VPN.
***In compliance with local regulations, the Third-party VPN feature may be restricted to specific regions.
- Added client speed limit under clients' detailed setting page.
- Supported Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
- Added Scene Priority under QOS.
- Added Client MAC Identification to improve the accuracy of device detection.
- Added Firmware Auto Update.
- Supported Matter
- Advanced Parental Control subscription added APP block/App Time Limits feature, which supports 2000+ applications.
- Added Camera Security
- Added Whitelist/ Wi-Fi Access Control
- Added notification for Ethernet connection speed.
- Supported Captive Portal for Guest Network
Enhancements
- Optimized the collaboration with Tapo smart devices.
- Updated HomeShield Parental Control service.
- Improved network stability and system security.
Firmware Download Link
Deco X50/X55_V1.30/V1.33 |
1.3.1_build_20251122_Beta |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Jackdm I can understand.....If Deco changes channels without reboot after every few minutes or hours so the connected devices will be disconnected and satellite deco nodes which are connected on wireless backhaul will be disconnected and because of this overall mesh system will messed up and having connectivity issues because if we reboot our Deco system so all the Deco nodes start using different 2.4 GHz and 5 GHz channels and they took some time to match same as Main Deco unit for seamless roaming between Deco nodes.
- Copy Link
- Report Inappropriate Content
@rakib_5056802 yes brother
- Copy Link
- Report Inappropriate Content
@ARGamingPK1 device version please
- Copy Link
- Report Inappropriate Content
@rakib_5056802 I'm using Deco M4 (V2) firmware 1.8.1
- Copy Link
- Report Inappropriate Content
No, you do not understand. Maybe I am explaining it incorrectly, I'm no expert so that's why I am reaching out to you guys.
First of all, I never said anything about rebooting the deco to change the channel. It was you that recommended it. And now you are trying to tell me the downside of rebooting 😂
So let me try to explain better..... There is an option to set channel change to AUTO. I set my unit to AUTO but it does not change by itself to find the best channel at a given time. My old router used to do this without disconnecting or disrupting my internet connection.
There is an option for network optimization which technically does the same thing as AUTO channel selection but you have to do it manually. Or like you said reboot or schedule a reboot. A channel change should not disturb or disconnect the internet connection like you said. It simply should be searching for the best channel at any given time AUTOMATICALLY.
Please tell me, what is the purpose of the option AUTO in the channel selection feature?
- Copy Link
- Report Inappropriate Content
@Jackdm Bro Deco and Router both are different i have Archer AX10 and yes Router can automatically change WiFi channels at any time but Deco can't do that because Deco use mesh technology and wireless backhaul nodes and client devices use same WiFi channels at a same time so if Deco start changing channels at any time so the client devices will be disconnected and also wireless backhaul nodes will be disconnected too and because of that whole mesh will be interrupted and messed up. That's why Deco could'nt change the channels automatically at any time. Now let's talk about AUTO. Deco choose channels Automatically when u reboot the whole deco system if you select AUTO based on the interference and environment.
- Copy Link
- Report Inappropriate Content
@David-TP version 1.30
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback.
Deco X50_V1.3_1.3.1 is a HomeShield model, and its Monthly/weekly reports don't support listing how many MB a device consumes per day and how many MB it consumes per month. It has been planned, but there hasn't been an ETA yet.
For the Speed Limit, there was similar feedback earlier, and it has been reported to the senior engineer for further analysis. I'll keep this updated with further improvements.
By the way, please make sure the random MAC address has been disabled on the Redmi Note 10 and try to disable "IPV6" on the Deco App>More> Internet Connection>IPV6 to see whether it made any difference.
Best regards.
- Copy Link
- Report Inappropriate Content
Thank you for this explanation as I now understand, hence, that's why I said you guys are the experts. I wasn't saying you were wrong just that based on your previous responses I thought you weren't understanding me.
I now do you understand based on this explanation.
- Copy Link
- Report Inappropriate Content
I tried to purchase Homeshield through the app but I getting error. "purchasing not supported due to some reasons". So I'm not even able to use 30 day trial
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 2672
Replies: 61
Voters 0
No one has voted for it yet.