Beta Software Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN
Hey Everyone,
We’re excited to introduce a new firmware update for the Deco X50/X55_V1.30/V1.33, packed with powerful new features and enhancements designed to elevate your Deco Mesh Home Networking experience.
This Article Applies to:
Deco X50(US/KR) / Deco X55(US/CA)_V1.30/V1.33
Modifications and Enhancements:
New Features
- Supported Channel Selection.
- Supported Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
- Added DoH/DoT under Deco APP>More>Advanced.
- Supported 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.
- Supported WireGuard VPN Server/Client.
- Supported built-in easy configuration of NordVPN/Surfshark VPN.
***In compliance with local regulations, the Third-party VPN feature may be restricted to specific regions.
- Added client speed limit under clients' detailed setting page.
- Supported Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
- Added Scene Priority under QOS.
- Added Client MAC Identification to improve the accuracy of device detection.
- Added ECO Mode(Including Wi-Fi Schedule)
- Added Firmware Auto Update.
- Supported Matter
- Advanced Parental Control subscription added APP block/App Time Limits feature, which supports 2000+ applications.
- Added Camera Security
- Added Whitelist/ Wi-Fi Access Control
- Added notification for Ethernet connection speed.
- Supported Captive Portal for Guest Network
Enhancements
- Optimized the collaboration with Tapo smart devices.
- Updated HomeShield Parental Control service.
- Improved network stability and system security.
Firmware Download Link
Deco X50/X55_V1.30/V1.33 |
1.3.1_build_20251122_Beta |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP is this also for x50 outdoor?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi there — thank you for the update and for rolling out the new firmware/features! 👍
I’m glad to see that you’ve added things like Channel Selection, Wi-Fi Access Control, and VPN support. However — I’m still seeing that Device Isolation is not working properly. Even though I marked a device as “isolated”, it can still communicate with my other local devices (ping, access web interfaces, etc.).
- Copy Link
- Report Inappropriate Content
@David-TP VPN client is not working and Eco mode is not coming with this update...!?
- Copy Link
- Report Inappropriate Content
@SayeemAhmed ECO Mode is not good i tried on Deco M4 after turned ON internet speed goes down and ping is high and the performance is slow.
- Copy Link
- Report Inappropriate Content
@Joviaali Speed limit doesn't work properly in new firmware.
- Copy Link
- Report Inappropriate Content
Even though I marked a device as “isolated”, it can still communicate with my other local devices (ping, access web interfaces, etc.).
Hi, thanks for the feedback. What is this device? did you have a similar issue on other devices?
By the way, can you find "ECO Mode" on the Deco APP?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP where eco mode...? 
- Copy Link
- Report Inappropriate Content
Hi, I do remember that you have other Deco models in the Mesh network. The ECO needs the support of all Deco units in the network.
Can you add more details about the issue"VPN client is not working"?
Which VPN server do you plan to connect to? via OpenVPN or WireGuard VPN protocol?
Any error message on the Deco APP, such as the VPN Client status is always connecting?
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback.
Can you give me some examples of how the Speed Limit is not working?
It would be better to add some screenshots of the configuration and speedtest results so that the engineers can try to reproduce the issue on their own.
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 956
Replies: 23
Voters 0
No one has voted for it yet.