Home Network Community > Deco > Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
< Deco

Early Access Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch

1234

Early Access Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch

40 Reply
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
Yesterday

  @David-TP When I open the Deco app, it suddenly crashes whenever I try to view the details of any client. I’m not sure what kind of issue this is.

Additionally, I have set the MIMO channel to 40MHz, but it still shows 1×1 MIMO. Even after setting 40MHz, it displays 20MHz, which I don’t understand.

In this case, if 2×2 MIMO were supported, I could achieve much higher speeds. For example, I am using a TL-WR841N in repeater mode connected to my Deco X50 on the 2.4GHz band. All the clients connected through the TL-WR841N are using 2×2 MIMO and are getting good speeds, which I am quite satisfied with.

However, when using the Deco X50 as the main router, it shows a 1×1 MIMO connection on the same 2.4GHz band. I don’t understand why it does not connect using 2×2 MIMO in this case, and I would appreciate an explanation.

I hope these issues will be fixed in the next update of Deco X50 Version 1.30 so that such problems do not occur in the future.

I am attaching some screenshots to help illustrate these issues.

  2  
  2  
#35
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
Yesterday

  @David-TP What is the reason for this...!?

File:
IMG_20260412_172007.jpgDownload
Sayeem Ahmed from Bangladesh
  0  
  0  
#36
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
13 hours ago - last edited 12 hours ago

  @SayeemAhmed 

@rakib_5056802 

I'll check with the engineer how the wireless bandwidth, as well as "MIMO", was measured.

By the way, they might also be related to the mobile devices themselves. Can you check if I got all the details correctly here:

2*Deco X50_V1.3_1.8.2+1*Deco X10_1.4.0
 		 Motorola Edge 60 Fusion
  • The IP address was not displayed
  • Can't sync wireless standard/wireless Encryption
  • Wireless bandwidth only showed 20MHz when 5GHz is set as 80MHz
Redmi Note 12 802.11ac/80mhz; 1*1 MIMO
OnePlus 8
  • 802.11ax/80mhz; 2*2 MIMO

(connected to the main Deco X50）

 

  • 802.11ax/80mhz；4*4 MIMO 

(connected to the satellite Deco X50)
     
Deco X50_V1.3_1.8.2 with 841N as a wireless repeater Oppo Reno12 F

802.11n/40Mhz; 2*2 MIMO

Update: The maximum wireless bandwidth for 2.4Ghz/802.11n is 40MHz
Redmi Note 10 802.11ac/80mhz; 1*1 MIMO
Redmi Note 12 802.11ac/80MHz; 2*2 MIMO

 

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for all Deco models
  0  
  0  
#37
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
12 hours ago

  @shuvo17 

Hi, is Deco X50_V1.3_1.8.2 the only Deco model in the Mesh system? Do you have any other models?

Please also make sure Deco is in wireless router mode, and the Deco App is up-to-date. (3.10.175 for Android+3.10.376 for iOS).

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for all Deco models
  0  
  0  
#38
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
9 hours ago

  @David-TP It seems to me that what is supported on X50 is not supported on X10, but if you bring some important updates to X10, I think it is possible to solve it.

Sayeem Ahmed from Bangladesh
  1  
  1  
#39
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
8 hours ago

  @SayeemAhmed 

Hi, thanks for the update.

I'll keep the community updated if there is any further news about Deco X10.

By the way, would you please do me a favor and submit the App log:How to submit Deco APP log

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for all Deco models
  0  
  0  
#40
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
7 hours ago

  @David-TP Okay, can you please update Deco X10 to support 160mhz?

Sayeem Ahmed from Bangladesh
  0  
  0  
#41
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
7 hours ago

  @David-TP Why is it showing 80mhz even after setting it to 160mhz..!?

File:
Screenshot_2026-04-13-15-13-09-05_f49179b090611efe64122144cd8cb960.jpgDownload
Sayeem Ahmed from Bangladesh
  0  
  0  
#42
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
6 hours ago - last edited 6 hours ago

I am using single unit Deco X50 router in my home.

 

  0  
  0  
#43
Options
Re:Deco X50/X55_V1.3_1.8.2 Expanded the Client Connection Detail and Added ECO Mode, VPN Kill Switch
an hour ago - last edited an hour ago

I previously used Deco X50 version 1.30 (Deco X50 (US)_V1.30_1.3.1 Build 20251122). Currently, I have updated to version 1.8.2 Build 20260401 Rel.35041 (beta), and I am getting significantly better performance.

The new version is much more optimized compared to the previous one. Notably, there are clear improvements in traffic usage monitoring and overall network stability. Even when the 2.4GHz signal is set to 20MHz, I am getting much higher speeds than before—which I have personally tested and confirmed.

Everything is now working almost perfectly. However, if all devices supported 2×2 MIMO, the performance and speed would be even better.  @David-TP 

  0  
  0  
#44
Options
1234

Tags

ECO Mode/Wi-Fi Schedule Highlighted Thread Official Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.