Official Release Deco APP Release Note
Android: Deco APP in Google Play
IOS: Deco APP in App Store
Version History
Deco APP 3.7.0
Release Notes:
1. Fixed some bugs and improve the APP stability.
Release Notes:
-
Introduced the ability to select offline clients for QoS.
-
Implemented a restriction on using inappropriate words as DDNS domains.
-
Fixed the issue that Deco onboarding gets stuck on Wi-Fi scanning.
-
Enhanced the overall APP experience for smoother usage.
Release Notes:
1. Provide a fresh and improved Client List UI for better usability.
2. Implement a Password strength indication feature to help users create stronger passwords.
3. Enhance the APP log-in process via Face ID & Touch ID.
4. Remove the restriction of spaces in Wi-Fi passwords.
Deco APP 3.4.0
- Version 3.4.16 for Android OS / Version 3.4.21 for IOS
Release Notes:
1. Support Dark Mode.
2. Add OFDMA on/off switch( Also requires the support of product software.)
- Version 3.4.6 for Android OS / Version 3.4.10 for IOS
Release Notes:
1. Support Widget for Parental Controls.
2. Share Wi-Fi via QR code.
3. Support customizing IP& MAC address under Address Reservation.
Deco APP 3.3.0
- Version 3.3.18 for Android OS/ Version 3.3.42 for IOS
Release Notes:
1. Added the support for landscape mode on iPad/Tablets.
2. Added the support for password-less logins via your smartphone's stored biometrics (face or fingerprint) instead of manually entering your master password.
3. Added the "Replace Main Deco" function to allow setting up a new main Deco to replace the current main Deco.
4. Fixed some bugs and improved the stability.
>>For more configuration details, please refer to New Deco APP supports Passwordless Authentication and replaces main Deco via simple setup
- Version 3.3.5 for Android OS / Version 3.3.10 for IOS
Release Notes:
1. Add support for the newly-released Deco BE Models.
2. Optimized the onboarding process of Deco WifI 7 products.
3. Improved Network Security Scan feature.
4. Optimized Homeshield Pro Subscription.
5. Remove the "Test Speed" Feature in the Deco Lab
6. Fix some bugs and improved the stability.
Deco APP 3.2.0
Verizon 3.2.14 for Android OS / Version 3.2.10 for IOS
Release Notes:
1. Add support for Deco WifI 7 products.
2. Add ECO Mode interface. (This feature also requires the firmware support of your current Deco products!)
3. Optimized online client displays.
4. Fix some bugs and improved the stability.
Note: The actual UI might be different from the illustrations due to different models and APP version upgrades. It is suggested to download the APP directly to have a full view of the detailed features.
There are more UI and interaction changes waiting to be explored. Welcome to download and share your experience with us. Any feedback is highly appreciated.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, welcome to the community.
Thanks a lot for your suggestions.
For the first one--manually choose the signal source for satellite Deco nodes, It is more related to the Deco software, not the APP. And there is already a plan for this feature. For more details, you could refer to this link:Manual Signal Source Selection on Deco
For the second one--more pictures/icons for devices, I do see other users mentioned the same, and please vote here to add your support:
Deco app device icons too few compared to Tether app
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Thank you and I dare say you might be the first user to install the latest 3.1.7 on the IOS. Well done!
When I checked on the iPhone, it still displayed the connection clients:
But I do see there is random feedback that the numbers are blank. Will it display the correct numbers after refreshing or leaving the APP running for a while, maybe 30-60 seconds?
I see there are 3 online clients below and if you check the device's settings on them, will you see the current connected Deco, for example:
And if it displayed "0" all the time, can you help me submit the APP log as well:How to submit Deco APP log
Best regards.
- Copy Link
- Report Inappropriate Content
David-TP wrote
As for the devices in the profile, somehow I was unable to reproduce this issue. If it showed "none" all the time since the APP had a delay sometimes, could you please refer to this link to help me get the APP log:How to submit Deco APP log
Best regards.
To be clear, you must enable the Block (pause) function on that Profile first, then click through the Profile, and select Edit. Then the Devices show as "None" rather than the number of devices in that Profile. I verified it on all of my Profiles. I will upload an APP log as requested.
The language corrected for the Profile Block (pause) only appears to have been partially fixed (iOS APP v3.1.7, Deco M9+ FW 1.5.6):
When initiating a Profile Block (pause), the pop up screen to verify the action shows language which describes the function correctly. "Devises belonging to the XprofileX will be unable to access the internet until you manually allow." Like this:
However, the confirmation message which pops up AFTER the Block (pause) is enabled still shows incorrect language, implying that the Block is only until tomorrow. "All XprofileX's devices are disconnected from internet and will be restored to internet tomorrow." Like this:
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Steveo369 Ah, Thanks a lot for the confirmation. Now I can see the same issue on my side. Thank you again.
Please let me check with the engineer again and I think it needs further optimization.
Best regards.
arktiknova Thank you very much and we have got the system log.
- Copy Link
- Report Inappropriate Content
@David-TP I've updated to the latest iOS version of the app (3.1.7) and am running the new production firmware for the V1 X50 (1.1.0).
The user guide for 3.0 says that you should be able to test the speed from your router from the home page of the app - however this option is not appearing in my app - can you advise?
- Copy Link
- Report Inappropriate Content
I have updated the App but now when I select any Deco from the list it no longer shows a list of any clients connected. However if I select a client from the online clients list it shows me the Deco to which it is connected.
- Copy Link
- Report Inappropriate Content
@Hawklord the funny thing is that I got a follow up email from the enginneer asking for more screenshots and details, when I have already given the logs and the proper screenshots.
Seems that they are just oblivious about their very own products. They should make their engineers use the products themselves to see how buggy and poor things are quality wise. Just sad state of things having invested into the TP-Link ecosystem.
- Copy Link
- Report Inappropriate Content
Hi, "Test Internet Speed" requires support on Deco software. It is not about the Deco APP. The current firmware of Deco X50 does not support this feature yet.
For more details, you could have a look at this link:
Hawklord, thanks for the feedback.
If you manually restart the Deco once, after Deco got fully restarted, will it display the connected devices correctly?
By the way, How many online devices do you have?
Could you please help me get the APP log as well:How to submit Deco APP log
Best regards.
Hi, nice to see you again. I think the engineers might want to confirm some details with you in case they missed some details.
The New APP 3.0 does change a lot compared with 2.0 so there might be all kinds of inflexibility and adjuments at the very start. With all the user feedback, I am sure the APP will get more optimized and user-friendly.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
David-TP wrote
Hi, "Test Internet Speed" requires support on Deco software. It is not about the Deco APP. The current firmware of Deco X50 does not support this feature yet.
For more details, you could have a look at this link:
@David-TP this would seem like a pretty basic requirement for a mesh system - any idea when this will be added to the x50 firmware?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 46224
Replies: 266