Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for the advice, resetting it did the trick in the end.
But I must say, having to physically uninstall the satellite (which has multiple LAN devices connected), carry it over to the main router plug it in via cable to perform the update (forgetting about the MAC filter first...) an then re-adding it to the mesh (which didn't succeed in the first attempt) was quite a bit of work.
I'm glad that this is now not necessary anymore but it would have been nice if direct update of the satellite were possible from the first version...
So far it seems to run pretty stable but I've noticed a few oddities:
The number of client devices per mesh device in the "Network Map" in the web interface is wrong.
There are only 12 devices in total and the sum of the mesh devices doesn't add up:
Same in the "Easy Mesh" tab:
It seems that the main router is also counting the satellite devices and they also show up in the device list of the router.
In the "Tether" app it shows up correctly though... (BTW: Great that we can finally manage EasyMesh in Tether!)
Then there is a device that sometimes (or always? not sure ye) shows up as "Offline" in the device list even if the person using it is sitting right next to me:
Maybe it has to do with the speed limit?
The web interface overally is also pretty confusing IMO:
- Why are there so many different places that show a network map in a slightly different way?
- Why is the list of clients per mesh device only visible under "EasyMesh" and not in the network map?
- Why is the list of clients hidden in the "Edit" dialog?
- Why is there another list of mesh devices in the "Firmware Udate" tab instead of just allowing to perform the update from the one of the other places where they are listed anyway?
Just for comparison, this is what a clean mesh overview looks like while still providing all the information in one place:
Sorry for "advertising" a competitor here, but it really makes the difference obvious.
Another annoyance is the naming and location of devices:
- I named my main router "Router", so why is the device name shown as "Archer AX55" in the device map instead of the proper name?
- Why is there no possibility to set the main router's location?
- Why is the Tether app mixing name and location in the EasyMesh section?
- Copy Link
- Report Inappropriate Content
@sperla @Atsukio @HighVoltageGuy @Zdzislaw
Hi All,
Good News!
We have just updated the beta firmware to "Archer_AX55_V1_1.2.6 Build_20231106", which solved the login issue in AP mode, please update to the new firmware and test if previous issue has been resolved.
Looking forward to your update!
- Copy Link
- Report Inappropriate Content
Sunshine wrote
@sperla @Atsukio @HighVoltageGuy @Zdzislaw
Hi All,
Good News!
We have just updated the beta firmware to "Archer_AX55_V1_1.2.6 Build_20231106", which solved the login issue in AP mode, please update to the new firmware and test if previous issue has been resolved.
Looking forward to your update!
Looking forward to trying this out, though i'll need to wait till tomorrow after they've got my fibre-optic replaced or something, as my internet isn't working as of today, pending ISP to get it resolved.
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the detailed feedback.
We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue. Please check your email box and confirm.
- Copy Link
- Report Inappropriate Content
@Atsukio This is noted, thank you very much for your kind reply.
Please let us know once you have any update.
- Copy Link
- Report Inappropriate Content
Ax55 and ax23 are not connected directly, only through the provider's router (Star topology. I only have one ethernet cable for each floor, that's why I needed ax55 in AP mode). I don't want a wireless connection because it is too weak for proper operation.
I uploaded Archer_AX55_V1_1.2.6 Build_20231106 and now logging in to the main router works.
Thank you very much.
The main router and tether application now also shows connected clients, but only connected to the main AX55 router. Ax23 satellite shows 0 clients.
It would be useful to update firmware for ax23 so that you can log in directly to the satellite and set basic things such as static IP, WIFI signal strength.
Now the satellite GUI show message "Rejected request under RE mode."
- Copy Link
- Report Inappropriate Content
I testing beta firmware (20230603-rel46473) on my both AX55v1. And for now works great and finnaly blackhaul <3 that is awesome, but some things neeed update:
1. Sometimes not showing connected clinets list on satelite router (web and tether) but i still investigate that becouse today always works LOL :D
2. Cant change name of storge usb on sattelite router always operation fail. Only can be "Tp-Share"
3. Restart schedule is missing for satellite router.
PS. i just notice a new beta firmware 20231106-rel45124 release, so more update after testing it :)
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback.
Currently, only the AX55 V1 beta firmware supports to manage satellite router, after the AX55 V1 beta firmware trial ends and official firmware releases, I believe more EasyMesh routers will support it.
Regarding the satellite router client 0, after you move to the satellite router area, please disconnect WiFi and reconnect it to ensure it is connected to the satellite router, then check the client again, if still shows 0, please share with us some screenshots.
By the way, the EasyMesh page of the AX55 shows the AX23 is connected via Ethernet cable, right?
- Copy Link
- Report Inappropriate Content
Thanks for the feedback, please test the new beta firmware 20231106-rel45124 and let us know if there is any issues.
- Copy Link
- Report Inappropriate Content
Sunshine wrote
@sperla @Atsukio @HighVoltageGuy @Zdzislaw
Hi All,
Good News!
We have just updated the beta firmware to "Archer_AX55_V1_1.2.6 Build_20231106", which solved the login issue in AP mode, please update to the new firmware and test if previous issue has been resolved.
Looking forward to your update!
Internet's back up on my end, i just installed the firmware, will let you know how it goes in 24 hours.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 64874
Replies: 303