Beta Software Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul
Beta Software Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul
Great news to Archer AX90 owners!
We are so excited to share a public beta version of firmware for Archer AX90 V1 with the community, which has added support for EasyMesh. If you're looking for a mesh solution with your existing Archer AX90, don't hesitate to upgrade and install this beta firmware to try it out.
This Article Applies to:
Archer AX90 V1/V1.20
New Features and Modifications:
- Added support for EasyMesh and Ethernet backhaul.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the BETA firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) This version of software contains important updates with EasyMesh, so it CANNOT be degraded to the previous version.
(4) EasyMesh would not be available when the router works in Access Point mode.
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) This public beta firmware for Archer AX90 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Direct Firmware Download link:
Archer AX90_V1&V1.20_1.2.0 Build 20241125 (Beta Software)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Related Articles:
How to Build an Ethernet Backhaul Using Two EasyMesh Routers?
What is EasyMesh?
What is Wi-Fi EasyMesh and how does it work with TP-Link routers and extenders?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Itai__ wrote
@Kevin_Z When I'm turning the Easymesh on, the router crashes all the time/ Internet disconects.
I am using AX90 + 2*re705 extenders. Is there a newer beta? when would the stable be out?
@Itai__ Thank you for the feedback.
Regarding the issue you reported, could you please clarify the below details?
1. How are the AX90 and the two RE705X connected? Make sure they are not connected to the AX90 via any Ethernet cables.
2. Does the router crash When turning on EasyMesh on the AX90 and not adding the extenders? What if you leave the two RE705X powered off and disconnect from the network, then try to enable the EasyMesh on the AX90 again, will it crash?
- Copy Link
- Report Inappropriate Content
nathanielcwm wrote
@Kevin_Z I also seem to have a problem with the WiFi turning off and the led indicator light becoming red randomly.
@nathanielcwm Could you please also provide more details about your network topology and the settings to help us confirm the issue? Thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 709
Replies: 12
Voters 0
No one has voted for it yet.