@DarrenM89 Hi there, if you set up a VPN on this router when the clients connecting to the VPN, it also needs to put in the username and password to connect to the VPN. Not all the device can connect...

@unmesh Hi there, is the EAP225 show disconnected on Controller Software for some times? Please try to check if this EAP225 can still get the IP address on the Software, then you can power off the...

@bodjie7 Hello friend, maybe there will have some unknown issue if you upgrade the firmware version with the wrong hardware version. It is better to follow the rules. An interesting thing to see if...

@bodjie7 The relatively low and continuous part of the average curve indicates less radio noise. So according to this screenshot, the frequency 2412 to 2452 is recommended, and refer to channel 1 to...

@Kris_P The issue seems to be regular. I think it needs to determine the issue first. When the issue happens, you can connect one PC to the same port on the modem, which connects to the ER605 before,...

@sysadsk There has a reset button in front of the switch, you just need to press the reset button for about 7 seconds, when all the lights turn on and then turn off, it means the reset is successful....