Hi All, I just bought the EAP660 HD and I am planning to use via POE attached to a switch TP-LINK TL-SG1016PE ( Easy Smart 8 POE+ with 30W max per port ). Unfortunately upon connecting the AP to the s

I have setup L2TP/IPSec on an ER605 (v1 hardware, 1.1.1 firmware) connected to a Huawei gateway with UDP Ports 500 & 4500 forwarded to the ER605. With no other changes, (ALG IPSec is on by default) a

I have the following setup OC200 R605 2x EAP225 1x EAP225 outdoor 1x EAP235 Wall. I have 380Mb broadband, everything connected via Gigabit ethernet, 2.4GHz set to 20MHz wide channels and set 1, 5, 9,

Hi All, TP-Link is aware of the vulnerability in Apache Log4j used in Omada Controller (CVE-2021-44228: Apache Log4j2 <=2.14.1 JNDI features used in configuration, log messages, and parameters do not

I started having difficulty with my smart home devices, and staying connected to wifi. I have 4 visible SSID created, 3 with both 5GHz and 2.4GHz, plus a specific SSID created for these devices, with

Was wondering if DFS is supported for the EAP610 and or the EAP620 given that the usual 5ghz channels are getting rather congested. Is there also a difference between the EAP610v1 and the EAP610v3?