H200 Hub Range
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.H200 Hub Range
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
I recently purchased the Tapo bundle that contained 2xC420S2 cameras and the H200 hub. Getting the cameras to connect ot the hub was fairly easy but when setting the camera's in the desired locations is proving troublesome. I tried to have the hub as central as possible but only one camera connects. Looking in the app the signal is showing bad. Had I known the range is this bad I would just gone with the wired C320WS option as that connects nicely to the mesh network. Is there anyway to boost the signal from the hub or do i need to get another hub so i can connect have both cameras operating. Would the H100 hub work?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Thank you for your case report.
Are there any obstacles between the hub and the cameras? The cameras and the hub are connected by a wireless signal, and usually, the more obstacles between the camera and the hub, the greater the interference in the environment, and the weaker the signal received by the cameras.
In this case, can you send the photos of the placement of the camera and the hub, as well as the specific environment and obstacles between the camera and the hub, for further analysis? (You can send me the link to download the photos via private message.)
Best Regards
- Copy Link
- Report Inappropriate Content
@Gardz - whole set up is pretty useless.given the very ooor range of the hub. I tomassumed that it used my tp link mesh network - no more Tapo products for me.
- Copy Link
- Report Inappropriate Content
@Simonrash same here, I'd expect I could hook up my Hub via an ethernet cable & have the cameras connect to it via the DECO Mesh system
- Copy Link
- Report Inappropriate Content
@Solla-topee maybe some firmware updates that allow the cameras to be connected to the hub via a home network would be a good idea.
- Copy Link
- Report Inappropriate Content
Hi,
The Tapo battery camera, such as the Tapo C420, C400, and D230, will connect to the Tapo Hub H200 via sub-G signal to go to the internet, and the H200 can connect to the wireless router by an Ethernet cable or Wi-Fi.
While other Tapo camera models, such as Tapo C200, C310, etc., are connected to the router's Wi-Fi directly and don't need to connect to the hub H200. You can select different cameras as per your requirements.
If your camera connects to the H200 to go to the internet and the signal strength is bad, you can try to remove obstacles between them if possible, or move them closer to each other.
Best Regards
- Copy Link
- Report Inappropriate Content
Your comments always start off with, is there anything between the devices and the hub. Of course there will be. None of us bought a line of sight device nor do we live in the open air.
My cameras are outside my home and my home is made of concrete. Is your hub weather proof? No. So how am I to use an outside camera with an inside hub and not have any obstructions between them?
Your company has offered a less than adequate device and sold it as a convenience.
If I pull the ethernet cable from the hub and move it more central to both cameras will I loose internet capability? I assumed it had to be plugged into my router. If not, then I'll relocate it and see if I can squeeze more signal out of it.
I've generally been extremely happy with your company's products. Still love this cameras and hub system but not its performance.
- Copy Link
- Report Inappropriate Content
@EJBates Hi, the Tapo H200 supports Wi-Fi connection, I found the setup instructions on its official website: https://www.tp-link.com/us/support/faq/3821/
- Copy Link
- Report Inappropriate Content
@Solla-topee Thanks for mentioning the differences between home wifi / Hub and your cameras - I hadn't appreciated the differences!
Repling so I can find this thread before buying...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 7838
Replies: 18
Voters 0
No one has voted for it yet.