Smart Home Community > Tapo Smart Camera > No Power - Tapo C200
< Tapo Smart Camera

No Power - Tapo C200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No Power - Tapo C200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No Power - Tapo C200
No Power - Tapo C200
2025-04-06 22:17:22 - last edited 2025-05-09 07:41:09
Tags: #Firmware #Tapo Care #Remote Control
Model: TC70  
Hardware Version:
Firmware Version:

Hi. I have this Tapo C200/TC70 camera for a while. It suddenly stopped working, no matter that the power was running and the camera was dead. I opened it up, and removed everything, put it back, wiring pushed it, etc. Plugged it in, still nothing. Tried nearly everything... The motherboard seems dead, unresponsive to anything. Any advise please?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:No Power - Tapo C200-Solution
2025-04-08 09:49:44 - last edited 2025-05-09 07:41:09

  @rlsangre 

Hi, 
Typically, if the camera can't be powered on, you can try the following steps.
  1. Power on the camera with the original power adapter that comes with the camera from the package.
  2. Remove the SD card from the camera.
  3. Connect the power adapter to another power socket.
  4. Connect the camera to another power adapter if you have one. 

 

If the problem remains, you can contact your retailer or our local team to check if the camera is under warranty. (Note: If you disassemble the camera, it may void its warranty.)

Best Regards

>> What to do if the Detection feature is not working on the TP-Link Camera. >> Enhance Video Clarity: Troubleshooting Tips for Improving Camera Video Quality. >> General questions about the TP-Link camera's Pan & Tilt feature.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:No Power - Tapo C200-Solution
2025-04-08 09:49:44 - last edited 2025-05-09 07:41:09

  @rlsangre 

Hi, 
Typically, if the camera can't be powered on, you can try the following steps.
  1. Power on the camera with the original power adapter that comes with the camera from the package.
  2. Remove the SD card from the camera.
  3. Connect the power adapter to another power socket.
  4. Connect the camera to another power adapter if you have one. 

 

If the problem remains, you can contact your retailer or our local team to check if the camera is under warranty. (Note: If you disassemble the camera, it may void its warranty.)

Best Regards

>> What to do if the Detection feature is not working on the TP-Link Camera. >> Enhance Video Clarity: Troubleshooting Tips for Improving Camera Video Quality. >> General questions about the TP-Link camera's Pan & Tilt feature.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 528

Replies: 1

Tags

Firmware Tapo Care Remote Control
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.