Confusing Speed Test with Deco X68 mesh
I am troubled because of 2 things that happened this week and not sure what is going on.
1. Got a notification that a "bug" need to be fixed with a firmware update to one of the devices on my network an X20 was added years ago because I could not buy just one X65 to expand my coverage. Ok so the firmware went in, the system re-booted and all was good.
Then!
AT&T fiber went out for a day, came back and I noticed slow speeds to all my devices, I have a 300mbps service but each device PC, cell phone, etc was getting only 5mbps or less. My system is AT&T Fiber modem > Deco X65 > ethernet cable to> 16 port TPLink switch + 2 &5 GHz WiFi
BUT when I removed the cable to the 16 port switch and direct into the Deco I got 300mbps. If I connected directly to the Fiber modem, I got the same thing.
I had not made any system changes except to update the firmware on the X20.
I connected all back, and rebooted the Deco, as well as the fiber modem.. same problem. The Deco was limiting the speed to my devices.
Fustrated, I went to bed.
This morning, everything is running a top speed, no throttled device.
I am worried as I read that the "New" firmware is supposed to let me manage speed to each device. It seems there is a bug in the last firmware.
What has anyone else experienced?