Creating a Static Route for Archer Routers and Starlink

After connecting to Archer’s Wireless network, you may find that you cannot manage the settings of the Starlink connection without first configuring a static route for your network. Follow the steps below to configure a static route for your network to access the Starlink management interface while connected to your router’s wireless network. 

1. Navigate to the Web Interface of your Router using the IP address or tplinkwifi.net
   1. See the FAQ: How Do I Log Into the Web-Based Management Page of a TP-Link Wireless Router
2. Open the Advanced Tab
3. Navigate to Network > Routing
4. Click “Add +” Above the Static Route Table

Network Destination: 192.168.100.0 (The IP Address of Your Starlink Gateway)

Subnet Mask: 255.255.255.0

Gateway Field: 192.168.100.1

Interface: WAN

5. Click Save

You Should now be able to access the settings for your Starlink Gateway while connected to your new Wi-Fi network, such as your Snow Melt, Satellite Calibration, and overall statistics from Starlink.

*This article includes the use of Starlink equipment or services.  Starlink equipment and service are registered trademarks of Starlink and its parent company SpaceX. The use of this equipment and services is to provide instructional use only.

Related Articles:

Getting Started with TP-Link and Starlink

Extending Your Existing Starlink Wi-Fi with a Range Extender

Discussion: May 22nd, 2023, Your Experience with Starlink and TP-Link

Knowledge Base: Configuring Your Network for Starlink: Archer Router | Deco Mesh

Knowledge Base: Creating a Static Route for Starlink: Archer Router | Deco Mesh

Knowledge Base: Starlink Frequently Asked Questions