Forums/
Deco
2024-07-18 16:48:55
@SDWAN-MAN, Can you provide a but more information about how your Decos are connected, such as if they are all wired, or pass their backhaul through a switch? I would also want to double check that...
0HELPFULS
Forums/
Deco
2024-07-18 16:34:16
@peeple, Thanks! Before I go through this with my team, I would recommend going into your switch's interface and disabling the Loopback Detection feature for the port on the Deco. When the Deco...
0HELPFULS
Forums/
Wi-Fi Routers
2024-07-17 18:27:20
@KWRoller, For the A9 this increase was seen in the patch notes available on the A9s firmware download page; For the A7, I do not see a similar firmware update increasing the cap. Keep in mind that...
0HELPFULS
Forums/
Range Extenders
2024-07-17 17:49:41
@Greeny96, OneMesh will put all of your bands from the RE and Router under the same SSID. The idea is that this will allow the Smart Connect feature to provide your device with the best connection no...
0HELPFULS
Forums/
Kasa Smart Plugs
2024-07-17 17:37:13
@rocketraman, It would greatly depend on how the plug fails. There is a setting that will allow you to set what happens when the plug loses power and receives power again: On, Off, Last 'On' State...
0HELPFULS
Forums/
Deco
2024-07-17 17:13:45
@JasonGabler, You are correct, It is possible to be done that way. Normally, blocking ethernet connections refers to entirely shutting down a specific ethernet port on a router - you would always be...
0HELPFULS