Solution Solution to DHCP Issues of Routers (ER605 | ER7206 | ER8411 | ER7212PC) [Closed on May 22nd 2023]
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update as of May 22nd 2023:
The following official firmware has fixed the DHCP issue mentioned in this thread.
ER605 V1_1.3.0 Official Firmware (Released on May 17th, 2023)
Note: the firmware is applied to ER605 V1 and V1.60.
ER605 V2_2.1.2 Official Firmware (Released on Feb 14th, 2023)
Note: the firmware is applied to ER605 V2 and V2.60.
ER7206 V1_1.3.0 Official Firmware (Released on Mar 28th, 2023)
Note: the firmware is applied to ER7206 V1 and V1.60.
ER8411 V1_1.0.3 Official Firmware (Released on Mar 17th, 2023)
Note: the firmware is applied to ER8411 V1 and V1.60.
ER7212PC V1_1.0.3 Official Firmware (Released on Mar 21st, 2023)
As the official firmware has been released to fix the issue, this thread will be locked to stop updating.
Any further issues or concerns, please feel free to Start a New Thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
Update as of Mar 8th 2023:
1. Update the Beta firmware of ER7212PC v1, which fixed all DHCP issues and added some new features.
ER7212PC(UN)_V1_1.0.3 Build 20230228 (Beta)
Beta Release Note:
1) Fixed all DHCP issues based on the official firmware 1.0.2 Build 20230202.
2) Add support for modifying port PVID and optimized stability of the device.
3) Cloud Access is available for the above ER7212PC 1.0.3 Beta.
4) You may need to manually upgrade the upcoming official 1.0.3 firmware once you install the above 1.0.3 Beta.
2. Add note that ER605 v1 and ER7206 v1 have a new Beta firmware for trial, which fixed all DHCP issues and added some new features.
ER7206 V1_1.2.3 Beta Firmware For Trial (Released on Feb 28th, 2023)
ER605 V1_1.2.3 Beta Firmware For Trial (Released on Feb 28th, 2023)
Kind Note:
If you don't need the new features added in the above 1.2.3 Build 20230224 (Beta), it's okay to stay with the earlier Build 20230208 (Beta).
Notes:
(1) Please be sure you have read the Beta Test Agreement before proceeding!
(2) The above Beta has added the fix for the DHCP Reservation issue mentioned HERE.
Update as of Feb 21st 2023:
Add beta firmware for ER8411 v1 and ER7212PC v1 to fix all DHCP issues.
ER8411(UN)_V1_1.0.2 Build 20230214 (Beta)
Beta Release Note:
Fixed all DHCP issues based on the official firmware 1.0.2 Build 20230115.
Notes:
(1) Please be sure you have read the Beta Test Agreement before proceeding!
(2) The above Beta has added the fix for the DHCP Reservation issue mentioned HERE.
Edit on Feb 23rd 2023: add note that Cloud Access is unavailable for the above ER7212PC Beta.
New ER7212PC Beta will be provided soon to add Cloud Access availability. Please wait patiently.
Update as of Feb 14th 2023:
Here are the new solutions to resolve the new DHCP issues we recently received in the community, including
1. DHCP Server failed to assign an IP address when a large number of clients make DHCP requests at the same time.
2. DHCP server failed to assign the correct reserved IP address to some clients.
Beta Firmware Download:
ER605(UN)_v1_1.2.2_Build 20230208 (Beta)
Beta Release Note:
Fixed all DHCP issues based on the official firmware 1.2.1 Build 20220512.
ER7206(UN)_v1_1.2.3_Build 20230208 (Beta)
Beta Release Note:
Fixed all DHCP issues based on the official firmware 1.2.3 Build 20221104.
ER8411(UN)_V1_1.0.2 Build 20230214 (Beta)
Beta Release Note:
Fixed all DHCP issues based on the official firmware 1.0.2 Build 20230115.
Notes:
(1) Please be sure you have read the Beta Test Agreement before proceeding!
(2) The above Beta has added the fix for the DHCP Reservation issue mentioned HERE.
For ER605 V2, please check for the official firmware below to fix the DHCP issue.
ER605 V2_2.1.2 Official Firmware (Released on Feb 14th, 2023)
Note: the firmware is applied to ER605 V2 and V2.60.
As always, thank you for working with our support engineers to address the issue with great cooperation.
And thank you all for your great patience when we're trying to figure out the issue and fix it!
Update as of Jan 30th 2023:
Thank you all for your feedback on this forum to let us know that the DHCP issues are still existed, and more importantly, thanks for our loyal users who worked with our support engineers to figure out the issue with great cooperation.
Here are the updates of the Beta firmware to fix all the DHCP issues that have been located, including
- DHCP Server failed to assign valid IP addresses to some clients. Reported Here.
- Different clients have duplicated IP address on the Omada Controller. Reported Here.
- Offline wireless clients were still shown up in Clients list and reported as connected to the Omada Router. Reported Here.
(Note that ER605 v2 ONLY have the last DHCP issue mentioned above, which is a mis-report by the router.)
Beta Firmware Download:
ER605(UN)_v1_1.2.2_Build 20230118 (Beta)
Beta Release Note:
Fixed the DHCP issues based on the official firmware 1.2.1 Build 20220512.
ER7206(UN)_v1_1.2.3_Build 20230118 (Beta)
Beta Release Note:
Fixed the DHCP issues based on the official firmware 1.2.3 Build 20221104.
Notes:
(1) Please be sure you have read the Beta Test Agreement before proceeding!
(2) The above Beta has added the fix for the DHCP Reservation issue mentioned HERE.
For ER605 V2 and ER8411 V1, please check for the official firmware below to fix the DHCP issue.
ER605 V2_2.1.1 Official Firmware (Released on Jan 30th, 2023)
Note: the firmware is applied to ER605 V2 and V2.60.
ER8411 V1_1.0.2 Official Firmware (Released on Jan 30th, 2023)
Note: the firmware is applied to ER8411 V1 and V1.60
Thank you all for your great patience when we're trying to figure out the issue and fix it!
Any further issues with the above Beta firmware, please feel free to comment below or Start a New Thread from HERE.
Updated on Nov 11th 2022:
The official firmware ER7206_v1_1.2.3 has been released to fix the DHCP issue.
**The above ER7206 1.2.3 firmware is available in the cloud, fully adapted to Omada Controller v5.6.
Updated on Nov 2nd 2022:
Update the Beta firmware to fix all the DHCP issues that have been reported to the support team, including the issue
- DHCP Server failed to assign valid IP addresses to some clients. Reported Here.
- Different clients have duplicated IP address on the Omada Controller. Reported Here.
- Offline wireless clients were still shown up in Clients list and reported as connected to the Omada Router. Reported Here.
ER605(UN)_v1_1.2.2_Build 20221015 (Beta)
ER7206(UN)_v1_1.2.2_Build 20221025 (Beta)
ER605(UN)_v2_2.0.2_Build 20221025 (Beta)
*The above beta firmware is adapted to Omada Controller v5.5, not for Controller v5.6.
Note:
ER605 v2 ONLY have the last DHCP issue mentioned above, which is a mis-report by the router.
Updated on Sep 21st 2022:
Remove the 0918 Beta firmware as some users reported it causes CPU spikes issue.
Updated on Sep 19th 2022:
Update the Beta firmware and add the latest Beta firmware for ER605 v2/ v2.6, which have added the fix that Omada Router may wrongly report the clients status to the Omada Controller, causing the issue that offline clients were still shown up in the Controller Clients list, and connected to the Omada Router (instead of the SSID or network). For more details, check this related post.
ER605(UN)_v1_1.2.2_Build 20220902 (Beta)
ER7206(UN)_v1_1.2.2_Build 20220902 (Beta)
Newer version >> ER605(UN)_v1_1.2.2_Build 20220918 (Beta)
Newer version >> ER7206(UN)_v1_1.2.2_Build 20220918 (Beta)
Newer version >> ER605(UN)_v2_2.0.2_Build 20220918 (Beta)
This Article Applies to:
ER605_v1/ v1.6
with FW 1.2.0 Build 20220114 or FW 1.2.1 Build 20220512
ER7206_v1/ v1.6
with FW 1.2.0 Build 20220117 or FW 1.2.1 Build 20220512
Issue Description/Phenomenon:
Recently we received feedback that the DHCP Server failed with 1.2.0 and 1.2.1 firmware, the issue may manifest as follows:
- DHCP Server won't provide dynamic IP addresses to end clients in some cases.
Related Post: DHCP Server Fails Every Few Hours
(1) simply clicking Save on the Edit Network page will bring the DHCP server to work for a few hours.
(2) reboot doesn't help, the issue doesn't exist with the router firmware 1.1.1.
- Some clients are assigned the same IP address, causing they cannot access the internet.
Related Post: Issues with DHCP, clients get same iP addresses
(1) rebooting the router will solve the issue for a while.
(2) the issue doesn't exist with the router firmware 1.1.1.
Note:
ER605 v2 doesn't have the two DHCP issue described above.
Thank you all @jdpk, @Karel-24, @PascalSBR for reporting the issue with detailed information, and your great cooperation with our support engineers to look into the issue is much appreciated!
After further investigation and tests, the TP-Link team has addressed the problem finally.
Available Solutions:
Update as of Apr 17th 2023:
The following official firmware has fixed the DHCP issue mentioned in this thread.
ER605 V2_2.1.2 Official Firmware (Released on Feb 14th, 2023)
Note: the firmware is applied to ER605 V2 and V2.60.
ER7206 V1_1.3.0 Official Firmware (Released on Mar 28th, 2023)
Note: the firmware is applied to ER7206 V1 and V1.60.
ER8411 V1_1.0.3 Official Firmware (Released on Mar 17th, 2023)
Note: the firmware is applied to ER8411 V1 and V1.60.
ER7212PC V1_1.0.3 Official Firmware (Released on Mar 21st, 2023)
For ER605 V1, you may install the Beta firmware below to fix the issue temporarily.
Beta Firmware Download:
ER605 V1_1.2.3_Build 20230413 Beta Firmware For Trial (Released on Apr 14th, 2023)
Notes:
(1) Please be sure you have read the Beta Test Agreement before proceeding!
(2) The above Beta has added the fix for the DHCP Reservation issue mentioned HERE.
Update as of May 22nd 2023:
The following official firmware has fixed the DHCP issue mentioned in this thread.
ER605 V1_1.3.0 Official Firmware (Released on May 17th, 2023)
Note: the firmware is applied to ER605 V1 and V1.60.
As the official firmware has been released to fix the issue, this thread will be locked to stop updating.
Any further issues or concerns, please feel free to Start a New Thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
Thank you all for your great patience when we're trying to figure out the issue and fix it!
Previous Solution Post:
ER605 ER7206 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Exactly as I would expect at this point. TP-Link is a joke of a company that has no clue how to make any of this expensive equipment they are selling work. We're all the fools for sitting around waiting months for them to figure out how to design firmware to make a router issue IP addresses... the most basic function of any router. Any paying large amounts of money for equipment with no more than a rock.
- Copy Link
- Report Inappropriate Content
unfortunately I would have to echo the sentiment. I wished at this point I payed double and went with unify eco system. Now with 2 switches and 3 AP and a router I kind of stuck. Can not upgrade to omada 5 nor to the new fw version so I have to continue on the outdated software as I just need something that more or less works. I think the head of software engineering at TP link should resign and they should hire someone who can overhaul the system and introduce regiouris practises of testing and even go with TDD approach so that everyone is responsible and have tests at multiple levels.
- Copy Link
- Report Inappropriate Content
yes this is the routers from hell, but the router is probably programmed as a middle school project without a supervisor, kidding aside. The TP-Link routers are really bad, I have them all and they are all equally buggy.
we have to cross fingers and hope that everything is in order with the next update.
until then we have to be creative to find a workaround.
- Copy Link
- Report Inappropriate Content
@Fae Please, give us some feedback on this issue. 
- Copy Link
- Report Inappropriate Content
@Fae And an update on firewall features for IPv6 (there is currently no IPv6 firewall protection for 605's).
- Copy Link
- Report Inappropriate Content
@DannyZ I have been with Omada for many years now, I had an ER605, upgraded to a ER7206 many moons ago lol, but I have installed in the office now 1x ER7206; 1x TL-SG3428; 2x TL-SG2210MP; 3x TL-SG2008; and 3x EAP225 APs. I'm gonna be real honest, 1.2.3 for the ER7206 is the first time in at least 3 years that I have had any issues with the firmware or any of the equipment. As far as it being expensive, that's absolutely not true, Omada gear costs less than almost all of it's counterparts, and it really does show. I guess you truly do get what you pay for these days. Now, with that being said, has anyone confirmed if these things work in Standalone mode? Because at this point, if this issue doesn't persist in standalone, I might just forego the controller entirely and configure things using the Web GUIs like we used to do before we had centralized SDN networking LOL. It is rather disappointing that Fae couldn't even be bothered to reply, at this point, this was purchased for my business, not my home, and is installed in my business, I have spoken to my Attorney's and they are going to start looking at what we can do to get back some of the money we paid for these clearly not ready for business solutions.
- Copy Link
- Report Inappropriate Content
@havenstance Home office stand alone. IMHO this a hardware issue and why do few of us report the problems. Got my replacement on hand, will be configuring it tomorrow.
- Copy Link
- Report Inappropriate Content
Which model are you using? What hardware version did you have and what version did they replace it with?
Please let us know if the newer version works!
- Copy Link
- Report Inappropriate Content
@KellisR I totally agree with it being hardware related, if it helps I have the ER7206 v1.6 as printed on the bottom of the router, however, the controller reports it as 1.0 and installs the 1.0 firmware revision vs the 1.6. TP-Link claims these are interchangeable, however if I go and install the v1.6 firmware from the website, this issue will take longer to recur. But alas, it will inevitably return at some point, usually in the middle of the night, and I wake up expecting to work only to find I need to roll back off v1.2.3 firmware to v1.2.1 and that stops the DHCP issue from happening, this just appeared for me with this new reivision, and it goes away after reverting back to the v1.2.1 firmware on my router, again i make sure to download the v1.6 vs the v1.0 because the v1.0 firmware will cause the issue to crop up even on firmware 1.2.1, otherwise this has been rock solid since I purchased it roughly 2 maybe 3 years ago now. I'm hopeful this is just another bug that will be fixed on the next firmware release, and if not, they need to let us know, so we can reach out the them to get these faulty units replaced, they are afterall guaranteed for life according to TP-Link. I don't mind if it was something they didn't foresee, you can't see the future when you create something, packages get depreciated, drivers as well, chipsets get dropped, etc. This platform has the potential to be an amazing time saving tool for businesses of all sizes, if TP-Link can work out the kinks, it will get better. At this point, if they can fix it for the newer units, and reach out to those of us who are having the problem with the solution for replacement, I would be satisfied for sure.
Edited for clarity regarding hardware issue.
- Copy Link
- Report Inappropriate Content
@Fae The problem still persist. I update my ER7206 with firmware version 1.2.3 and still have issues with dhcp. Some clients doesn´t receive a valid IP on netwok. The problem is solved after reboot de router, but it happens again the next day
- Copy Link
- Report Inappropriate Content
Information
Helpful: 12
Views: 64173
Replies: 276
Voters 6
