Solution Disable OneMesh Hidden SSID on the 3G/4G modem
Hello everyone,
Some customers may report their Onemesh routers are emitting a hidden network, which makes them confused and nervous as they cannot turn it off manually on the router web GUI.
The hidden wireless network is used to build up the mesh wireless network system, and it cannot be detected by the common wireless devices. You can refer to this article for more details:
https://community.tp-link.com/en/home/stories/detail/728
Just like the existing Deco mesh package products, the specific hidden network with high-intensity random password can guarantee the security of the network. So no worries.
However, if you still want to disable the Onemesh hidden network on the router, we here provide a beta firmware for the MR600 V1 and MR200 V4/V5, customers can install this firmware on your device, then disable the Onemesh network manually via the web GUI.
Archer MR600 V3_20230308-click here to download.
Archer MR600 V2_20220815-click here to download.
Archer MR600 V1_20210818-click here to download.
Archer MR200 V6_20240104-click here to download.
Archer MR200 V5.30_20230920-click here to download.
Archer MR200 V5.20_20230920-click here to download.
Archer MR200 V5_20211015-click here to download.
Archer MR200 V4_20210628-click here to download.
Archer MR400 V4.20_221230-click here to download.
For other models, we will add this feature in the near future. This will take some time, however, we hope you could wait patiently.
Note: We as always strongly recommend our customer upgrade their TP-Link devices to the latest official firmware, you can try the beta firmware posted by our TP-Link Admins/Officials unless the official firmware doesn't resolve the issue you experience.
Note:
1. Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
2. Be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding!
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, is it possible to create a firmware for the MR600(EU) V2 hardware that disables the OneMesh?
Alternatively, if you can share the setting I need to configure in my XML file then I can append the config value to disable, e.g. something like:
<X_TP_OneMesh>
<Enable val=0 />
</X_TP_OneMesh>
The hidden networks in the Windows 10 console are distracting and I'd like to turn off settings I don't use.
- Copy Link
- Report Inappropriate Content
@Kevin_Z any news for EU v2 units, no official firmware upgrade in sight yet?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello,
we would also strongly have use aof the feature to disable one mesh. (MR600V2)
We use the Router on fairs to provide network. And usually the fair restricts you to channels ant not alow 5G wifi
since the router still sends the one mesh network if 5g wifi is of it is really annoying.
We would also accept a Manuel fix like SSH or so!
- Copy Link
- Report Inappropriate Content
Hi, the firmware for MR600 V2 has been released, and please check the recommended solution on the first page.
- Copy Link
- Report Inappropriate Content
@TP-Link much appreciated, excellent support, kudos!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Has anyone faced with the inability to enter the Archer MR600 interface on the beta Archer MR600 V2_20211229 from a mobile phone browser?
I tried 4 different browsers and 3 phone. The same result is the same everywhere.
Technical support claims that the developer does not have this problem.
There was no bug on the release.
What was broken?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 16243
Replies: 48
Voters 1