Home Network Community > Wi-Fi Routers > EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
< Wi-Fi Routers

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

1969798...

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

1046 Reply
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-11 16:47:30

  @Kevin_Z

Will the EasyMesh feature  be availabe for Archer AX73 routers?

 

Thank you.

  0  
  0  
#93
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-06 14:21:14 - last edited 2023-05-13 17:55:21

  @Liverpool20 hi there,

 

I have used 2 C80 routers to create a Mesh wireless system laugh

 

* Update* 

Now i have 3 C80 'Routers'  as a working mesh network.

 

 

Regards,

 

Thom

  0  
  0  
#92
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-06 01:29:40

@Thom_NL 

 

What does this mean? I'm curious.

If my reply helps with the issue, please click on the arrow pointing upward. If it solves your issue, please click the star to mark it as a "Recommended Solution".
  0  
  0  
#91
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-05 10:54:50

  @Kevin_Z hi,

 

The use of the hammer was the solution enlightened

 

Hope that this information can help other users.

 

 

Regards,

 

Thom

  0  
  0  
#90
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-05 08:12:22

@Thom_NL 

 

Great job.yes

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#89
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-04 10:01:52 - last edited 2023-05-05 06:42:30

Good day,

 

Now I used the hammer wink

 

AP disconnected, Main router reset.

Then set the desired network and WiFi ( Channels still not editable To change the channel disable Smart connect). 

Then reset the AP. Reconnected without any settings.

 

After that, pressed the main router WPS button and within 2 minutes also on the other "Router".

 

Both C80 'routers' are now connected via Ethernet Backhaul as a Mesh network.

The second neatly as a node with the settings of the main router.

 

Short version, two C80 routers can be used as a Mesh network.

This may apply to other types of TP, Onemesh / Easymesh.

 

 

Regards,

 

Thom

 

  2  
  2  
#88
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-04 06:29:33 - last edited 2023-05-04 07:30:13

@Kevin_Z,

 

An automatic update was attempted, but the system listed firmware for the V1 version.

Bit weird because I have V2.20 so I did the manual way of updating.

In addition, I cannot change the wireless channels? I have 1 C80 as router and 1 C80 as AP. Still not working properly (Settings / Ethernet backhaul)

 

 

Regards,

 

Thom

  0  
  0  
#87
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-04 02:52:53

 

Thom_NL wrote

Goodday, Same firmware issue here ( C80 v2.20 ). May i receive the right firmware? Tia, Thom

 

 

The trick for this issue is found here https://www.tp-link.com/en/support/download/archer-c80/#Firmware ( stay at the ENglish page !! )

First take the oldest and then the next one and after the latest issue solved laugh

 

Regards,

 

Thom

 

 

@Thom_NL 

 

Regarding the new firmware for Archer C80 v2.20, you can check for updates on the router web interface page or via the Tether App as described below:

How to Upgrade the Firmware on the TP-Link Wi-Fi Routers (Case 2)

 

We will report to the local website admins to publish the new firmware ASAP.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#86
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-04 02:47:03

 

RoodRood wrote

  @Kevin_Z 

Same issues. I have an AX73 as a main router and a C80 as satellite One. The only way to make them work together was by pressing the WPS button on both. I tried the other way and to enter in configuration of the main router (AX73) but was impossible. Only after WPS was showing the C80 attached in the One Mesh, and showing me the clients connect.

 

I was using the guest network to connect only my IoT devices but I had to stopped doing it since it was impossible to activate the guest network in the satellite router (C80).

 

2weeks a go, I manage to put ethernet wire through my walls (just around 50meters) to connect both routers and looks like everything was good and everything work nicely for a couple days but I started having problems since I want to check again if the issue was solved and I tried again to activate the guest network and to change other stuff and the connection stopped working till I unplugged the satellite router (C80). I had to restart it and did the same WPS process to make it work again before be able to connect through ethernet again.

 

@RoodRood Can you explain in detail why you cannot add the satellite router via EasyMesh? When you logged into the web GUI of the main router, will you be able to find the satellite router? Please check and install the latest firmware on both routers.

 

Regarding the Guest Network, it has been discussed previously on this thread that EasyMesh doesn't support extending the Guest Network at the moment.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#85
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-02 09:55:10 - last edited 2023-05-05 07:32:05

Goodday, Same firmware issue here ( C80 v2.20 ). May i receive the right firmware? Tia, Thom

 

 

The trick for this issue is found here https://www.tp-link.com/en/support/download/archer-c80/#Firmware ( stay at the ENglish page !! )

First take the oldest and then the next one and after the latest issue solved laugh

 

Regards,

 

Thom

 

* EDIT * The NL support page is missing the link to the correct firmware

  0  
  0  
#84
Options
1969798...

Tags

EasyMesh Firmware Update Highlighted Thread EasyMesh Ethernet Backhaul
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.