Home Network Community > Wi-Fi Routers > EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
< Wi-Fi Routers

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

1212223...

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

914 Reply
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-22 17:29:21

  @Arucad 

Arucad wrote

Just added an Archer C86 to my ISP provided Archer C6. I updated both to latest version available through the Tether App.
Went into the C6 as it is the main router, selected EasyMesh and followed the instructions to add the C86 as a satelite.
NOTE: It is important that the satelite is NOT connected via Ethernet when adding it as a satelite. After adding it, you can plug it in.
I did speed tests before and after in different spots.
The Ethernet Backhaul feature worked almost immediately, even though it didn't show it in the Tether app, the speeds through the Satelite were as hoped for.
An hour or so later, the Tether app showed that it was connected by wire.
It was easier than expected. Cheers to the devs.

 

Followed the steps you've provided. But I notice something, when my satellite device is connected via ethernet, seems the connection is looping back to my main router. I ran test on it and seems the speed was throttled, ping is higher than the usual.

 

Main Router: AX72

Satellite Device: RE705X

 

Both updated to the latest version.

  1  
  1  
#223
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-22 17:58:19

  @Lilcris,

 

Good to hear that it is working.

 

I didn't had the satellite backhaul issue but it can certainly help others 👍

 

@Kevinz, maybe a hint for the manual team 

 

 

Regards,

 

Thom

 

  0  
  0  
#224
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-08-22 18:01:51

  hi @Macrox,

 

AP mode is obsolete when building a Mesh network imho 😁

 

Possibly a TP staff member can answer this question for us.

 

 

Regards,

 

Thom

 

  0  
  0  
#225
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-22 18:50:43 - last edited 2023-08-22 18:52:31

Lilcris wrote

  @Arucad 

Followed the steps you've provided. But I notice something, when my satellite device is connected via ethernet, seems the connection is looping back to my main router. I ran test on it and seems the speed was throttled, ping is higher than the usual.

 

Main Router: AX72

Satellite Device: RE705X

 

Both updated to the latest version.

 

  @Lilcris 

 

I am quite certain that for EasyMesh via Ethernet backhaul to work properly both, the main router and the satellite device have to specifically support it.

 

Just out of interest I tested this with a combination of Archer C64 as the main router (officially supports Ethernet backhaul) and a RE305 as EasyMesh satellite device (no official backhaul support) and after plugging in the Ethernet cable the whole network became somewhat sluggish and the webGUI of the Archer C64 showed the RE305 alternatingly as connected via wireless with one IP address or connected via cable with the IP address 192.168.0.254. In other words, it did not work.

 

  1  
  1  
#226
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-22 19:10:50

  @woozle,

 

This device has a updated firmware dated 2023 8 14 that does support Easymesh 😁

 

 

Regards,

 

Thom

 

  0  
  0  
#227
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-22 19:32:27

  @Thom_NL 

 

Yes, but not EasyMesh via Ethernet backhaul. And the same applies to the RE705X that Lilcris tested.

  0  
  0  
#228
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-23 02:03:47

  @Kevin_Z 

 

Do we have straight forward steps to setup ethernet backhaul? 

 

Devices:

AX72 (Main Router) - Updated to latest version

2x RE705X (Satellite Device) - Updated to the latest version

 

I have checked the compatibility and availability of easymesh on both devices before purchasing it and all devices support easymesh.

 

I tried following the guide on the Tether App on how to add easymesh satellite device and connect ethernet cable. It works but somehow the entire connection is sluggish, even accessing the dashboard. I also noticed that my main router is connected to itself, seems the connection from router to satellite is looping back.

 

Could be a bug on the firmware or known issue?

 

  0  
  0  
#229
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-23 03:02:26

  @Lilcris 

 

Hi, the range extender RE705X doesn't support Ethernet Backhaul, so if the EasyMesh network has been established via WiFi backhaul, please disconnect the Ethernet cable between the router and extenders, or there will be a network loop and cause issues.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#230
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-23 04:28:52

  @Sunshine 

 

Is there a plan to support RE705X ethernet backhaul?

 

So the only way as of now to maximize the connection speed is to wire the RE705X using AP mode?

  0  
  0  
#231
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-08-23 07:09:59

 

IamCenk wrote

  @Kevin_Z 

 

Kevin, 

 

Archer AX6000 was on the list as planned since months however, last week the list has changed and it got removed from the list. Do you have any information regarding to this?

I purchased C80 and two more RE550 to create an ethernet backhaul powered mesh network after I saw my router in the list, but now I feel like it won't happen at all.

 

Cheers!

 

@IamCenk  As previously confirmed with the product team, AX6000 could be also included in the EasyMesh planned list. I will check with the website admins to see if they missed AX6000 when updating the list.

 

Please check the EasyMesh product list later. Thank you.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#232
Options
1212223...

Tags

EasyMesh Firmware Update Highlighted Thread EasyMesh Ethernet Backhaul
Related Articles
EasyMesh not on AX53
2046 0
What is EasyMesh and how does it work with TP-Link routers and extenders?
87507 19
EasyMesh Configuration
699 0
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
13109 9
Archer C7 V5 - EasyMesh Support
1309 0
GX90 EasyMesh
112 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.