Home Network Community > Wi-Fi Routers > EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
< Wi-Fi Routers

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

1434445...

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

1044 Reply
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-09 06:00:06

  @Kevin_Z 

Hi, I recently setup my easy mesh wifi with my Archer C80 as my main and the newly purchased AX72 as the satellite, with Ethernet backhaul. Everything works fine expect there's one issue. Soon after setup or a reboot of my AX72 I can access the router from the tether app but after around 5-10 minutes it gets greyed out and inaccessible. The mesh system keeps on working though and I when I visit the easy mesh section of my C80 in tether app or on PC, I can see this router. I've attached a picture for reference.

  0  
  0  
#448
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-10 02:07:50

Taiada wrote

  @Kevin_Z 

 

EX511 Support EasyMesh Network via Ethernet Backhaul?

Thanks

 

@Taiada Yes. EX511 supports EasyMesh Ethernet Backhaul.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#449
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-10 02:13:46

@Alpha_Ghost96 

 

With the current firmware, you will not be able to manage the satellite unit after building up an EasyMesh network successfully.

 

This will be optimized in the future firmware soon.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#450
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-10 13:06:03
Thanks
  0  
  0  
#451
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-12 17:06:05

When are we going to get Ethernet Backhaul for the WiFi 6E or 7 routers?

I current have BE550 that is essential just an AP right now. I also noticed none of the AXExx routers are listed with Ethernet backhaul 

  0  
  0  
#452
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-13 08:50:09 - last edited 2023-11-13 08:51:52

 

xAirrick wrote

When are we going to get Ethernet Backhaul for the WiFi 6E or 7 routers?

I current have BE550 that is essential just an AP right now. I also noticed none of the AXExx routers are listed with Ethernet backhaul 

 

@xAirrick 

 

Hi, thanks for joining in this topic.

 

As per the EasyMesh Compatibility List, Archer BE550 has supported EasyMesh already and I believe it will also support Ethernet Backhaul in the near future.

 

When building up an EasyMesh network, Archer BE550 needs to be working in Router mode but not AP mode.

 

We do see some users request the EasyMesh routers to be working in AP mode, which has been brought forward to the decision team and they will consider supporting it in the near future. Please stay tuned.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#453
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-13 09:57:14

I have successfully set up my AX55 with 2 x C64 routers with wired backhaul.

 

I set up the 2nd AX55 the same way (having done the firmware update). When I plug in the Ethernet cable to the satellite AX55 it registers the connection with the status changing from the wifi symbol to the Ethernet symbol, but after about 10 seconds the entire network crashes & the Main AX55 does a complete reboot.

 

Is this an issue you're familiar with, or is there something that went wrong in my setup somewhere?
I've troubleshooted it multiple ways but still keep getting the same result.

  0  
  0  
#454
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-13 09:58:26

  @lukenz 

  0  
  0  
#455
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-13 10:17:06

  @Kevin_Z Hi, when could I expect to see the Ethernet backhaul support for my AX12 router? I am currently using it with my AX10, but then realized that the AX10 does has the backhaul support while AX12 doesn't is kind of annoying to me.

  1  
  1  
#456
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-11-13 11:21:51

 

lukenz wrote

I have successfully set up my AX55 with 2 x C64 routers with wired backhaul.

 

I set up the 2nd AX55 the same way (having done the firmware update). When I plug in the Ethernet cable to the satellite AX55 it registers the connection with the status changing from the wifi symbol to the Ethernet symbol, but after about 10 seconds the entire network crashes & the Main AX55 does a complete reboot.

 

Is this an issue you're familiar with, or is there something that went wrong in my setup somewhere?
I've troubleshooted it multiple ways but still keep getting the same result.

 

@lukenz 

 

As per the screenshot you attached, the two C64s join the mesh network via Ethernet Backhaul and the second AX55 joins the network via WiFi. Will the network also crash in this way?

 

Or does the network crash only when you plug the second AX55 into the main via an Ethernet cable? Which port did you connect the second AX55 to?

 

Please go through this thread and follow the connections carefully, then check again if the network will be working properly.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#457
Options
1434445...

Tags

EasyMesh Firmware Update Highlighted Thread EasyMesh Ethernet Backhaul
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.