EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

943 Reply
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-28 16:52:07

  @ChrisBS 

I believe BE800 will support easymesh ethernet backhaul in the future. As for now, my BE800 running on beta firmware (1.1.1 Build 20240322 rel.60800(5553)) support ethernet backhaul. 

  0  
  0  
#691
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-28 18:17:58

  @Jun2 

Support send you that beta firmware or you download from somewhere? :)

  0  
  0  
#692
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-28 18:36:48
request the firmware from support
  0  
  0  
#693
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-29 09:57:46

  @ChrisBS 

 

Hi, the BE800 V1 1.1.1 official firmware that supports Ethernet Backhaul is in releasing process now, I believe it will be available soon.

Upon checking, there is a beta firmware for now, which is the one mentioned by Jun2, we have added it to the original post in this thread.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#695
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-29 10:12:34

  @Sunshine 

Any beta firmware that support Ethernet Backhaul for BE805? I have 3 units BE805 and quite useless at the moment without this feature.

  0  
  0  
#696
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-29 11:14:14

Is there any update regarding the AX55 Pro getting ethernet backhaul?

  0  
  0  
#697
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-30 18:29:58

Hi,

ethernet backhaul only works if I connect the AX53v2 satellite router (same with AX23v1.2) directly to the AX73v2 main router. If there is a Switch on the way, only a wireless connection is established. All routers have the latest firmware. Is there any restriction/requirement for direct connection of devices without a Switch?

  1  
  1  
#698
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-30 19:20:16

  @yanck 

 

Disable "Loop Prevention" if possible with your switch...

  0  
  0  
#699
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-31 06:59:55

  @yanck

Hi,

 

Did you try maybe first to establish eth backhaul directly between main and satellite, then power off your satellite and move and connect again behind your switch. Power up and wait lets say 5 minutes for routers to hopefully establish ethernet connection.

This is my scenario. Different router model but scenario is the same.I have  c6 v4 model and two dumb switches between them. Also, in my tests this didn't work when I had Poe managed switch between routers.

But with dumb switches everything works without issues. I have one main and three satellites. All switches are gigabit.

Hope this helps.

 

Regards 

  0  
  0  
#700
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-03-31 11:01:01

  @Kevin_Z 

Router AX53v1, used in access point mode.
On firmware 1.2.2 there weren’t a single problem for a month, everything was fine.
On firmware 1.2.4 - every few days the web interface falls off, and I have to reboot it (by turning off/on the power).

  0  
  0  
#701
Options