@lemiel 

Thanks for the reply. I'm just getting use to the forum format. That’s good to hear the AX23 is getting use. I am not sure that your BE230 model is offered in Japan yet. I have looked over several BE models offered here and landed on the BE550 for its tri-band offering. I admit I don’t need the speed of Wifi 7 yet, just better range.

After a bit more research it seems they just updated the firmware of the wifi 6 AX3000 JP model to offer wired backhaul on November 29 2024. This simplifies my choice further and helps my budget too. 
I can either get 2 of these and an NAS. 

Or for a bit more two AX80 models that offer USB 3.0  and no need for an NAS unit yet. 

  @Kevin_Z 

thank you for your fast reply. 
Can you confirm if the BE550 V1 JP 

Japaese Version = BE9300

Offers the same wired backhaul
as well as mesh in AP model as the listed US model?

if not, PLEASE contact support to push this feature in the next JP firmware for it. 

Can you please add all the models

AC AX and BE for the Japanese market. To your pinned list 
The Japanese support note for firmware one by one often do not list this feature. 
And the Japanese site list cannot be sorting by any "filters" for clarity like the US site can. 

I’m happy to link this post and this info to my Reddit posts as well. 
TP link is growing as a brand here in Japan for Hikari fiber now; throughout Tokyo and perhaps nationwide.  A lot of users would buy these routers if they can confirm compatibility and features more clearly. 
You can get a much later market share just by adding as much details on individual product pages to your Japanese website; as you have for your US and UK sites.  
I’m sure this isn't your department but please pass this idea along too. 
 

thank you for your hard work. 

  @Kevin_Z 

From my own research individually. 
The only JP three Japanese models that state wired backhaul in the firmware. 
AX23V JP

AX3000 JP 

and the new RE900XD unit

https://www.tplink.com/jp/support/download/re900xd/#Firmware

NONE of the following models which were all updated with firmware in 2024 have wired backhaul. 
Listed in overall popularity of the market here:

AXE5400 JP

AX5400 JP

AX110000 JP

AX80 JP

AX73 JP

AX72 JP

Understandable, as their focus is now on the new BE series. But I am surprised that the lower cost AX3000 JP and the AX23V both received the updated ability but not the high priced and more capable models with USB 3.0 support. 

it seems my options are limited for either a few AX3000 units. Or the newer B550 units. 
 

Thank you kindly for all of you help and suppprt. 
You have been extremely knowledgeable and  very informative. I look forward to replacing my C3150 soon. 

  @Kevin_Z 

Another waste of time from TP-link.

Wanted a router to use as a EasyMesh Satelitte that was white and unlike all the Arceher models, does not look like its been designed by a 5 year old out of lego, found the VX230v on the website listed as supporting Wired Backhaul.

https://www.tp-link.com/uk/easymesh/product-list/#wi-fi-routers

So purchased the device, and cannot set up as a satelitte. Contacted TP-Link support only to be told....

  @Spawn_e_git 

Hi,

That is very unfortunate. I feel sorry for you.

I remember others have noticed it before that the filter switches for "Backhaul Connection" on the EasyMesh Product List webpage you mentioned do not work properly. (actually, to me it appears they do nothing at all)

  @woozle 

Hi. Thank you for your support

ts not just the backhaul issue but that this device canot act as a satellite (agent) at all.

It's just poor from TP-Link. They have too many models that have confusing and mixed names (how many are called AX1800) and with this many models  they can never hope to support and advance the brand as there are just too many variations to manage.

woozle wrote

  @Spawn_e_git 

 

Hi,

 

That is very unfortunate. I feel sorry for you.

 

I remember others have noticed it before that the filter switches for "Backhaul Connection" on the EasyMesh Product List webpage you mentioned do not work properly. (actually, to me it appears they do nothing at all)

 

  @Kevin_Z 

Hi Kevin,
I've been using the AX53 v1 in Beta since the beginning and there have been no more updates for it... Is there any forecast?

Mercusys routers can access the second router in Mesh without any problems, while TP-Link routers can't. Is there any possibility of this update?

Greetings from Angelo Winicius from Brazil

  @Kevin_Z Mesh Ethernet backhaul on Tp-link Archer AX53 V1 routers

The following scenario shows us my network topology and the issue I am facing once using Ethernet backhaul on my Mesh network at home.

Topology

My topology is Main Router -TP-link AX72 Pro V1- and 3 Satellite Routers   -TP-link AX53 V1- which are connected to the Main Router via Ethernet cable.

Firmware

The main router was updated to the last version and the satellites to firmware 1.2.4 Build 20240206 (Public Beta Firmware for Trial) which it is supposed to support Ethernet backhaul.

Mesh Configuration

TP-link AX53 V1 routers have been added to the main router as satellites via wireless successfully, it means Wireless Backhaul works in the Wifi Mesh.

Then Ethernet cables have been connected between a LAN port at the main router and the WAN por at the satellites successfully. A few minutes after, Ethernet Backhaul started to work successfully.

Issue

Once a power outage happens, the network stability is lost after power is reestablished.

Request

When will the Tp-link archer AX53 V1 router firmware be updated to an official one which supports Ethernet backhaul and to replace the public beta firmware 1.2.4 build 20240206?

It is a pending task that Tp-link must develop as soon as possible to resolve the request of many people who have bought this modern router.