One Mesh functionality with Archer AX 55 and RE450 or RE550

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

One Mesh functionality with Archer AX 55 and RE450 or RE550

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
One Mesh functionality with Archer AX 55 and RE450 or RE550
One Mesh functionality with Archer AX 55 and RE450 or RE550
2023-03-22 09:43:24 - last edited 2023-11-02 07:47:11
Model: Archer AX55   RE450   RE550  
Hardware Version: V1
Firmware Version: Archer X 55 Firmware 1.1.7 Build 20230213 rel. 74634

I have to use an Archer AX55 behind my Vodafone Station (in Router mode). For One Mesh it`s necessary to use Router mode on the Archer AX55. If the WAN-Port is connected to the LAN-Port at Vodafone Station WLAN access is interrupted some times a day (unmotivated). In AccessPoint Mode it`s working all fine. But it`s not possible to use MEsh functionality then. My wish is to use teh meshed WLAN cause of Size of home. Is there a solution for this scenario?  

  0      
  0      
#1
Options
1 Accepted Solution
Re:One Mesh functionality with Archer AX 55 and RE450 or RE550-Solution
2023-11-02 07:47:03 - last edited 2023-11-02 07:47:11

Hello @K_G 

 

Happy News!

 

We have provided public beta firmware for Archer AX55 V1, which introduces several exciting new functions and improvements to enhance your experience including Ethernet BackhaulEasyMesh in AP modeSatellite Router ManagementDoH&DoTECO Mode, etc.

 

Please visit the following thread to learn more about these new features, and do let us know if there is anything that comes up with the new beta:

Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode and More

 

We encourage you to try out this beta firmware and take advantage of the following features. Leave your comment or ask questions in the about topic. Your feedback and suggestions are greatly appreciated.

 

Related Articles:

Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul

How to Build an Ethernet Backhaul Using Two EasyMesh Routers

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:One Mesh functionality with Archer AX 55 and RE450 or RE550
2023-03-22 13:39:43

  @K_G 


An EasyMesh has been implemented already on Archer AX55. RE450 (v4 and above) and RE550.

It is planned EasyMesh to support devices in AP mode as well -- check this thread.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:One Mesh functionality with Archer AX 55 and RE450 or RE550
2023-03-23 10:59:15

  @K_G Is there a roadmap for "t is planned EasyMesh to support devices in AP mode as well"? 

  0  
  0  
#3
Options
Re:One Mesh functionality with Archer AX 55 and RE450 or RE550
2023-03-23 13:33:56

  @K_G 

 

No, there's no any announced roadmap or time schedule for implementing this feature. You should keep an eye on the thread i mention for any updates.

For now you could try to set your Vodafone station in bridge (modem only) mode and use AX55 in router mode, this way you'll avoid a double NAT in your LAN.

In general, AX55 Wi-Fi should be as much stable as it's in AP mode. The Wi-Fi interruptions you've mentioned can be due to some other reasons - it could be related to AX55 configuration, wireless interference or your infrastructure.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#4
Options
Re:One Mesh functionality with Archer AX 55 and RE450 or RE550-Solution
2023-11-02 07:47:03 - last edited 2023-11-02 07:47:11

Hello @K_G 

 

Happy News!

 

We have provided public beta firmware for Archer AX55 V1, which introduces several exciting new functions and improvements to enhance your experience including Ethernet BackhaulEasyMesh in AP modeSatellite Router ManagementDoH&DoTECO Mode, etc.

 

Please visit the following thread to learn more about these new features, and do let us know if there is anything that comes up with the new beta:

Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode and More

 

We encourage you to try out this beta firmware and take advantage of the following features. Leave your comment or ask questions in the about topic. Your feedback and suggestions are greatly appreciated.

 

Related Articles:

Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul

How to Build an Ethernet Backhaul Using Two EasyMesh Routers

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#5
Options