Official Release Deco X60_V3/3.2/4.2-1.3.0 Supports ECO Mode,WireGuard VPN and WiFi Access Control
This Article Applied to
Deco X60(EU/US/JP/SG)_3.0; Deco X60(SE)_3.2;Deco X60(EU/US)_4.2
Download Links
| Deco X60(EU/US)_V3.0 | 1.3.0_build_20240830 | Newly updated to 1.11.0 Platform |
| Deco X60(SG)_V3.0 | 1.3.0_build_20240830 | |
| Deco X60(SE)_V3.2 | 1.3.0_build_20240830 | |
| Deco X60(EU/US)_V4.2 | 1.3.0_build_20240830 |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery - How to Downgrade Deco.
4. How to identify the hardware version:How to find the hardware version on a TP-Link device
Modifications and Improvements
- Added Camera Security
- Added Whitelist/ Wi-Fi Access Control
- Supported Detection for Ethernet connection speed.
- Supported Captive Portal for Guest Network
- Supported TSS (TP-Link Simple Setup) Auto Discovery & Quick Configuration
- Added ECO Mode(Wi-Fi Schedule)
- Added Firmware Auto Update.
- Supported Matter
- Supported TKIP protocol for Tapo smart devices
- Advanced Parental Control subscription added APP block/App Time Limits feature, which supports 2000+ applications.
- Supported WireGuard VPN Server/Client.
- Supported built-in easy configuration of NordVPN/Surfshark VPN.
*In compliance with local regulations, the Third-party VPN feature may be restricted to specific regions.
- Added client speed limit under clients' detailed settings page.
- Supported Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
- Added Scene Priority under QOS.
- Added Client MAC Identification to improve the accuracy of device detection.
- Added more device types under Smart Home, such as Tapo/Kasa Light Strips.
- Supported uploading/downloading OpenVPN client certificates with customized filenames.
- Optimized overall network performance
Bug Fixes
- Fixed some bugs and enhanced security vulnerabilities.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@delong91 Thank you very much for sharing your ideas about the beta test with us. It's indeed very encouraging.
There are beta firmware versions for Deco X60_V2 and V3(https://community.tp-link.com/en/home/forum/topic/697580), but I didn't post them the first time. Sorry for the inconvenience. Since the engineers are quite cautious about the beta release, we don't want many non-official versions spreading around the community so we decided to upload it only after receiving user feedback.
Best regards.
- Copy Link
- Report Inappropriate Content
“Hi David, I’m having exactly that problem. While I have cameras and other devices, everything works great, but when I added 12 ‘Tapo S505’, the problems started.
I just updated to firmware version 1.3.0, but I skipped 1.2.8. Was it necessary?
Because, in fact, I’m still having the same problem. The decos disconnect, and then all the other devices lose signal.”
- Copy Link
- Report Inappropriate Content
@David-TP Yes David thats exactly what I wish to do, It would be beneficial If the Deco could do this, at present I commission via Alexa and then install the matter device on Hubitat
- Copy Link
- Report Inappropriate Content
I deactivated the reports function but i still get a weekly report today. I don't want (old) reports to be saved... How can I delete this data without deleting and re-creating my TP-Link account? This data should be stored on the TP-Link cloud and unfortunately there is no function in the app (andorid beta) to delete it.
Please let the engineers check why reports are still being created. If this cannot be stopped, then unfortunately I will have to leave the beta firmware :(
Thanks and best regards
- Copy Link
- Report Inappropriate Content
@David-TP I see this is now an official release, I take it that it will be a staged release, Any idea when this firmware will be available in the UK?, Thanks
- Copy Link
- Report Inappropriate Content
Here i am again
Sometimes the system change by itself from WPA2 / WPA3 to WPA2 and there is no more option to select WPA3 or WPA2 / WPA3.
In this case some devices disconnected (like Samsung TV and Fire TV Stick 4K 2nd) and cant connect again to WiFi. Only after a restart there is the option to select WPA2 / WPA3 and the devices can connect to system again. The issue is in main and guest network at the same time.
After restart:
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the new update.
I noticed you also submitted the latest Deco APP log and I will forward to the engineers for further comfirmation.
As for the reports, apart from disabling "Reports" under Deco APP>More>Reports>Settings, there is a "Notifications" settings under Deco APP>APP settings. You could also try to disable "Monthly Reports" notification here.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi, It is a staged release. But it is based on the MAC address, instead of the location.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for your time and patience.
I have confirmed with the senior engineers. Actually, the official 1.3.0 of Deco X60_V3 hasn't added the bug fix of 1.2.8 beta in Satellite Deco Units Work Well but Display Offline on the Deco APP
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 5136
Replies: 84
Voters 1
