Beta Software Enhance the Overall 5G network stability for Deco X50-5G/Archer NX200/NX500/NX600
This Article applies to
Deco X50-5G_V2, Archer NX200_V2, Archer NX600_V1
Any issues related to Deco X50-5G_V1, please make sure your firmware is up-to-date: Deco X50-5G-1.2.1 Official Now Available for Installation!
Firmware Modification:
- Fixed the issue that the 5G network randomly dropped out, and a reboot was needed to restore the internet connection.
- Improved overall network stability
Download Link:
| Deco X50-5G_V2 | Deco X50_5G_V2_1.1.0_Official |
| Archer NX200_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer NX200_V2 | Archer NX200_V2_1.1.0_20250616_Beta |
| Archer NX500_V1 | Archer_NX500_V1_1.0.0_20250616_Beta |
| Archer NX600_V1 | Archer NX600_V1_1.1.0_20250616_Beta |
| Archer NX600_V2 | Archer_NX600_V2_1.0.0_20250616_Beta |
Update Advice:
- Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
If the beta firmware didn't help, please comment below with your SIM service provider. We'll get in touch as soon as possible.
Related Articles:
Archer NX200 Can't Access Certain Websites or Only Receives an IPV6 Address
464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, welcome to the community.
If you check the hardware version on the bottom label, is it V2.0 or V2.2?
"1.1.0 3.0.0 v60e0.0 Build 250812 Rel.76795n", is the latest version for Archer NX200_V2.2.
And you can find the release note here:
https://www.tp-link.com/en/support/download/archer-nx200/v2.20/#Firmware
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
Hello @David-TP,
the version on the bottom label is actually v2.2.
However, on the Italian website of tp-link I see only v1/v2/v3, no mention to v2.2.
Moreover, the v2.0 beta version I picked from this thread works perfectly: is the firmware for v2.0 compatible with v2.2?
Thanks!
- Copy Link
- Report Inappropriate Content
Hi good day,
Can I use the TP-Link Archer NX200 with NordVPN? (I know about the BE65, which works with NordVPN.) I would really appreciate an answer.
- Copy Link
- Report Inappropriate Content
@David-TP Hi, Idk if it was a coincidence or not but since the update my NX200 is giving me some problems. I used to have 65-90 ms while gaming at most but lately is more like 100-150. At the same time I noticed that the router stopped losing connection and having to reset it... Is there any way I can rollback the firmware? Is it possible thay my ping is higher cause of the update?
My 5g connection was not perfect but I spent all summer without major problems and now I cant play normaly for more than 15 mins at best...
Thanks for the help
- Copy Link
- Report Inappropriate Content
Hi, thanks for your time and patience.
No, I'm afraid Archer NX200 doesn't support VPN Client to work with NordVPN.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
May I know your SIM carrier?
How about the current firmware and hardware version of your Archer NX200?
"now I cant play normaly for more than 15 mins at best..."
Did it help if we set the "Network Mode" to 4G only?
By the way, can you consistently reproduce this issue?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
Thanks for the update. Normally, V2.2 can't share the same bin file as V2.0. It is quite unexpected that the beta 20250616 here works for v2.2.
I'll check with the senior engineer to see if there is any possible reason.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thanks for your reply
My internet provider is Movistar
This is my current Firmware: 1.1.0 3.0.0 v60e0.0 Build 250812 Rel.76795n
Hardware: Archer NX200 v2.0 00000000
Switching to 4g didnt help. At first I thought the 5g was having problems at my area and try to switch it but the ping remained the same or event got worse.
And about reproducing it... Its really just the state my networks has been for the past 1-2 weeks. Sometimes I log and my ping its normal but 10-15 mins later it raises and other times its just bad as soon as I log in.
Normally my problems were the inestability , you know, high ping, low speed , losing connection...but everything at the same time. Now 99% of the time I have a really good speed and no disconnections but ping just seem to be higher than usual.
Again, maybe it was just a coincidence and my area started getting problems around the same time of the update but I cant help to wonder if it is related.
Thanks for your time and have a good day
- Copy Link
- Report Inappropriate Content
@David-TP I have a similar problem like ivanport...
I use the NX200 V2. My provider ist Telekom (Germany) and I have a very good 5G/4G signal at my location.
Since update to firmware 1.1.0.3.00 v60e0.0 Build 250812 Rel.76795n i have the issue, that streaming movies from e.g. Disney+ ist interrupted about every 2 minutes.
Its like the router loses the 5G connection.
There was no issue before the update.
Is it possible to downgrade the firmware to 24082?
Thank you!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 8379
Replies: 50
Voters 2
