Beta Software Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN
Hey Everyone,
We’re excited to introduce a new firmware update for the Deco X50/X55_V1.30/V1.33, packed with powerful new features and enhancements designed to elevate your Deco Mesh Home Networking experience.
This Article Applies to:
Deco X50(US/KR) / Deco X55(US/CA)_V1.30/V1.33
Modifications and Enhancements:
New Features
- Supported Channel Selection.
- Supported Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
- Added DoH/DoT under Deco APP>More>Advanced.
- Supported 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.
- Supported WireGuard VPN Server/Client.
- Supported built-in easy configuration of NordVPN/Surfshark VPN.
***In compliance with local regulations, the Third-party VPN feature may be restricted to specific regions.
- Added client speed limit under clients' detailed setting page.
- Supported Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
- Added Scene Priority under QOS.
- Added Client MAC Identification to improve the accuracy of device detection.
- Added Firmware Auto Update.
- Supported Matter
- Advanced Parental Control subscription added APP block/App Time Limits feature, which supports 2000+ applications.
- Added Camera Security
- Added Whitelist/ Wi-Fi Access Control
- Added notification for Ethernet connection speed.
- Supported Captive Portal for Guest Network
Enhancements
- Optimized the collaboration with Tapo smart devices.
- Updated HomeShield Parental Control service.
- Improved network stability and system security.
Firmware Download Link
Deco X50/X55_V1.30/V1.33 |
1.3.1_build_20251122_Beta |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Yes, this occurs only in 160hz. At 80hz bandwidth all channels appears. (including high channels) 
- Copy Link
- Report Inappropriate Content
Hi, thanks for the update.
It is suggested to refer to this link:https://community.tp-link.com/en/home/forum/topic/850998?replyId=1646064
There isn't enough bandwidth for 160MHz during channels 149-161.
As for channels 100-128, they are often shared with government and military weather radar systems, which might be restricted by Brazil ANATEL. If you're interested, it is recommended to check with the local technical support team:https://www.tp-link.com/br/support/contact-technical-support/#Hotline-Support
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, thanks for the feedback.
Have you run a speed test on the controller device itself?
After viewing the troubleshooting history with the previous users, it turns out the speed on the device is limited, but the real-time speed rate on the Deco App is still showing a high speed, which might make users think the speed limit is not working as expected:
How to Understand Speed Rates on the Deco APP
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, it should be channels 36-64 for 160MHz. I see it applies to both Brazil and Bangladesh.
Best regards.
- Copy Link
- Report Inappropriate Content
What determines which channels are best for which country? Because I am not located in either of those.
- Copy Link
- Report Inappropriate Content
@Jackdm Keep on Auto
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 6270
Replies: 108
Voters 2
