AX55 Onemesh
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.AX55 Onemesh
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can 1 put a second or 3rd AX55 in my WIRED network, put it in bridge mode ( as now my different AP's from different brands ) and than turn on Onemesh ?
Or is Onemesh always wireless in the backbone ? ( why ?? wired is faster and more reliable )
tnx
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, one correction for @Dooooo 's reply. Actually not all TP-Link EasyMesh routers support Ethernet Backhaul, for example, Archer AX55 supports EasyMesh but doesn't support Ethernet Backhaul yet. For the models that have already supported it, please refer to this thread:
EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
You could either use wireless backhaul to build the EasyMesh network, here is the guide:
How to add a router to an EasyMesh network as a satellite device
Or use the second AX55 as AP mode without mesh, here is the guide(Case 1):
How to configure the TP-Link wireless router as Access Point
- Copy Link
- Report Inappropriate Content
Hello @PeterBee
Happy News!
We have provided public beta firmware for Archer AX55 V1, which introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc.
Please visit the following thread to learn more about these new features, and do let us know if there is anything that comes up with the new beta:
Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode and More
We encourage you to try out this beta firmware and take advantage of the following features. Leave your comment or ask questions in the about topic. Your feedback and suggestions are greatly appreciated.
Related Articles:
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
- Copy Link
- Report Inappropriate Content
I am not sure what you mean by bridge mode. It seems that there are only two modes: Router mode and AP mode. And I suppose you are saying the AP mode.
Do you wanna put a cable between AX55 and the existing network and make a mesh network consisting of AX55 and the existing APs?
BTW, OneMesh is a private mesh protocol of TP. The EasyMesh is a protocol supported by many bands and supported by AX55. You can turn on EasyMesh on the existing APs and AX55 to make a mesh network. Wired backbone is OK.
- Copy Link
- Report Inappropriate Content
@PeterBee want a backbone per se on lan, so using exsisting AX55 as router. Exsisting AP's don't support Mesh, so therefor bougth an adittional 2 AX55 ( because i'm happy with how well they work and have a reliable Wifi signal and coverage ) and will use them with Easymesh . ( have to see if disabling DHCP is still nessesary, or putting it in Easymesh takes care of everything )
Onemesh only works is a wireless mode, therefor ( even with 3 AX55's ) Easymesh ....
tnx
- Copy Link
- Report Inappropriate Content
Hi, one correction for @Dooooo 's reply. Actually not all TP-Link EasyMesh routers support Ethernet Backhaul, for example, Archer AX55 supports EasyMesh but doesn't support Ethernet Backhaul yet. For the models that have already supported it, please refer to this thread:
EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
You could either use wireless backhaul to build the EasyMesh network, here is the guide:
How to add a router to an EasyMesh network as a satellite device
Or use the second AX55 as AP mode without mesh, here is the guide(Case 1):
How to configure the TP-Link wireless router as Access Point
- Copy Link
- Report Inappropriate Content
@PeterBee no
according to TP-Link :
Als u de laatste firmware gebruikt, dan ondersteunt deze router AX55 EasyMesh, en dat is wel bedraad te koppelen.
We hebben hier ook een f.a.q. voor op de website staan :
https://www.tp-link.com/nl/support/faq/3731/
- Copy Link
- Report Inappropriate Content
Hi, the FAQ: https://www.tp-link.com/nl/support/faq/3731/ is a configuration guide of EasyMesh Ethernet Backhaul, but AX55 V1 doesn't support Ethernet Backhaul yet, thus it will not work.
Since you've already had two AX55 V1 routers, you could also have a try. Please note that if the two routers are linked via WiFi backhaul and then you connect them via Ethernet cable, there will be a network loop resulting in network issues, in that case, please remove Ethernet cable between them to get them working again.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
To use EasyMesh among your AX55 routers, the other 2 routers could only connect wirelessly to the main router since Ethernet Backhaul is not supported yet.
Or you could also use the other 2 routers as AP mode and connect them to main router via Ethernet cable, please note that EasyMesh will not work this way.
- Copy Link
- Report Inappropriate Content
@QRen. Official dutch TP-link answer saying that with latest firmware, wired backhaul is supported
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2005
Replies: 15
Voters 0
No one has voted for it yet.