Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Bad news after update to last beta firmware...20231106-rel45124.
On satellite start be problems, switching all the time from easymesh from wireless to wire connection,
and start showing incorecctly conencted devices, after time no internet for all devices connected with sattelite
and end up with ERROR [1127] Config importing failed on system logs.
I do factory reset from interface but.. after trying switch config to sattliete mode again, router freeez and cant do nothing all the time errors on UI. Event click a resset button dont work.
I had to switch power offf/on and hit reset button.
After that i config again a sattelite mode (this time with no freez)
And all work fine for now, at least seems so
I will keep eyes on it... and write later again :)
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback.
Your main AX55 is working on Router mode or AP mode? and the second AX55 is connected to main AX55 via Ethernet cable, right? how far is it between the two AX55?
Please confirm if the web interface network map shows they are connected via Ethernet Backhual now, and if the client devices of mesh devices are showing correctly.
If there is any further issue, please let us know.
- Copy Link
- Report Inappropriate Content
Sunshine wrote
Hi, thank you very much for the feedback.
Currently, only the AX55 V1 beta firmware supports to manage satellite router, after the AX55 V1 beta firmware trial ends and official firmware releases, I believe more EasyMesh routers will support it.
Regarding the satellite router client 0, after you move to the satellite router area, please disconnect WiFi and reconnect it to ensure it is connected to the satellite router, then check the client again, if still shows 0, please share with us some screenshots.
By the way, the EasyMesh page of the AX55 shows the AX23 is connected via Ethernet cable, right?
Even when I am connected via WiFi directly to the satellite, the ax23 does not show clients, but overall I am very happy with the latest beta. I'm waiting for newer firmware for ax23. Mesh via Ethernet cable works well, switching is smooth.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hey, i little investigate and try recreate a problem :)
Seems problem appears only when you upgrade satellite router from beta to beta firmware by web interface on satellite router :D maybe autobackup corrupted?
i notice few bugs which comes randomly after update:
- switching/jumping status on web interface (main roauter) easymesh randomly show status from connected via Ethernet Backhual to wireless connected.
- not showing correctly client devices on satellite router but main router showing fine.
- showing offline satellite device on web interface in main router. But on satellite all was connected.
- satellite network stop work all connected devices lose internet and on system showing: Led Controller ERROR [1127] Config importing failed but on web interface on main router shows its working and connected.
- After factory restore by web interface and switch mode to easy mesh satellite, router stuck/not respond and don't show any progress on interface.
Problem was fix when turn off/on device and click hard reset (push button on back), the satellite device again respond. I configure easymesh all from beginning on main and satellite router. Now everything works like a charm all day/night (24h). Even showing properly connected client devices on satellite and main router no matter if connect by tether app or web interface.
On new beta firmware still missing:
- Schedule reboot for satellite router or add it with main router reboot schedule option( to reboot main/satellite in same time)
- Rename Storage device name on satellite router. Now shows always TP-Share and is not able to change it.
- Add Dynamic DNS for Storage device on satellite router to be able connect via internet.
- Eco mode for satellite router.
@Sunshine I will keep testing and let you know how goes stability or any issue show up or ideas for better functions :)
- Copy Link
- Report Inappropriate Content
Sunshine wrote
@sperla @Atsukio @HighVoltageGuy @Zdzislaw
Hi All,
Good News!
We have just updated the beta firmware to "Archer_AX55_V1_1.2.6 Build_20231106", which solved the login issue in AP mode, please update to the new firmware and test if previous issue has been resolved.
Looking forward to your update!
@Sunshine Great news, it's been 24 hours and ther web interface + internet has been very stable on my end. Will report back if anything happens, but in the meantime awesome work! 
(Can't say on the EasyMesh side of things for previously mentioned reasons).
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the detailed feedback, I have forwarded all the issue details and also feature requests to our engineers.
Let us know if you have any new findings.
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the update, very happy to hear that the issue doesn't appear again after installing the new beta firmware.
By the way, the new firmware for Archer AX73(US) 1.0 with EasyMesh feature is in releasing process now, I believe it will be available soon, and at that time, you could try the EasyMesh feature as well, let us know if you have any other feedback.
- Copy Link
- Report Inappropriate Content
Sunshine wrote
Hi, thank you very much for the update, very happy to hear that the issue doesn't appear again after installing the new beta firmware.
By the way, the new firmware for Archer AX73(US) 1.0 with EasyMesh feature is in releasing process now, I believe it will be available soon, and at that time, you could try the EasyMesh feature as well, let us know if you have any other feedback.
@Sunshine Oh sick, i look forward to letting you know how it goes after it's been released, thanks for letting me know! 
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 64020
Replies: 303
Voters 6
