So I wanted to test something this morning, logged into the controller and thought I might as well upgrade it (since I had been nagged for a while). The upgrade itself went fine. So I went ahead with

After modifing the wifi time schedule for the kids I discovered that the controler and the Site do not share the same Time. DST is configured on the controler but not for the only site I have. It's no

hallo all, I have three floor house and switching from Asus based network to Omada (ER605 + SG2008P + 3xEAP615-Wall). the EAPs are connected to the central PoE switch SG2008P (powered via PoE and ETH

Hello everyone , I'm trying to open ports on my omada interface But no success... It seems to me that my settings are good Box wan 192.168.1.1 Wlan Client 10.0.0.1/24 Local IP of station 10.0.0.1

I've upgraded from ER605 to ER707-M2 to increase the no. of VPN IPsec site-to-site access. But when remotely accessing the sites via the OpenVPN, the ER707 hangs-up, you can view through the OC300 con

Hi everyone, I just upgraded my ER605 firmware from 2.0.0 to 2.2.4, and my OpenVPN setup doesn't work anymore. The ER605 is behind a modem (on the NAT port) on which dynamic DNS is set up. I have also