@Fae Just made the update for OC300 to 5.0.29 from the Omada Cloud. All 68 AP EAP225 jumping in the loop of adopting and provisioning. The network and business are paralyzed. NEED URGENT HELP! UPD: Do

I have now doen this process twice, and both times failed exactly the same. Performing the upgrade to the new firmware (5.x) from the last latest release (September 21) fails. After reboot it gets to

Hi all, I have 4 EAP 225 outdoor. 2 of those are on MESH and 2 AP's connected directly to LAN on the Er605 router. However, one of them failed and connected to mesh instead. I was able to connect it t

First off, I just replaced a EAP245 V1 (not V3). I am NOT using any controller, but a single EAP in standalone mode. I configure the device via the EAP web interface. Setting up the new AP I noticed t

Hello ! I am preparing for a new site, where I am going to have about 10 EAP245's. (Routers and switches are something else) I run Unifi APs elsewhere, and have Raspberry pi 4 with 4GB RAM for Unifi C

Hello all! PoE standard does not connect (disconnect--- connect from WEB-http://192.168.0.1/0) I have ER7206 5 ports, 3 of my ports can work according to PoE standard, and the rest 2 according to VAN.