New Release Deco M5 1.6.1
![](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)
Latest Firmware Release:
For Deco M5(V1/V2/V3/V3.2)
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Notes:
1. Please update your Deco APP to the latest version for the new features.
2. If there are other Deco models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
3. You may miss some new features when Deco is set to Access Point mode.
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
is this new version fix the issue were the Main Deco frequently disconnects from the Internet? @TP-Link
- Copy Link
- Report Inappropriate Content
Installed the 2022.03.07 firmware for M5 version 3.8 hardware last night. Noticing a couple of things that are not working (seemingly). I'm using Brave browser to log onto the tplink.deco.net site, on a MacBook Air (2020) MacOS 11.6. I realize the website is not a priority, but thought I'd report it here.
1. On the Network Map - Clients screen, the filter by device tab does not filter the devices connected. It continues to show all devices.
2. On the Network Map - beneath the central icon representing the base station device, when the All Deco Map is expanded, clicking on one of the devices reveals a notification that "Operation Failed" which goes away after 3 seconds.
- Copy Link
- Report Inappropriate Content
@TP-Link After being installed for < 24 hours, the extremely noticeable internet delays and dropouts have lessened, or said another way, the wifi reliability has improved.
Also, doing a speedtest, internet speeds have not worsened, as one user reported on a previous version of the 1.60 firmware beta. I could not say if they have improved, as I've not been keeping tabs on our throughput until working to troubleshoot this issue.
I have another competitor's hardware sitting on the shelf that I got today if this does not fix the issue. Enough messing around with this.
Oh, and your website gives "Server Exception" notices about 9 out of 10 times when trying to post on this site.
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
Thank you very much for the feedback.
Would it be possible to record a video clip about these issues on the web UI to support.forum@tp-link.com?
1. On the Network Map - Clients screen, the filter by device tab does not filter the devices connected. It continues to show all devices.
--Do you refer to the settings here:
2. On the Network Map - beneath the central icon representing the base station device, when the All Deco Map is expanded, clicking on one of the devices reveal a notification that "Operation Failed" which goes away after 3 seconds.
--it is the map and by clicking each Deco, it reports "operation failed"?
Do you have this issue just after the 1.6.0 upgrade since I seemed to receive similar feedback on the 1.5.x version before?
As for the issue here," your website gives "Server Exception" notices about 9 out of 10 times when trying to post on this site", I also had this issue today and less frequently than you had experienced. I guess it might be due to the new tag filtering features and the engineers are already working out it.
Thank you very much.
Best regards.
--------------------------
Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.
- Copy Link
- Report Inappropriate Content
@DAServices interestingly, I just updated to 1.6.0 and also got several rounds of - that error "couldn't find deco". I put it down to a new internet connection, but perhaps it wasn't? I powered everything down and restarted and it seems ok now... strange.
- Copy Link
- Report Inappropriate Content
@macta Thanks for letting me know.
I guess it might take some time to fit the new firmware and you could keep monitoring the Deco to see whether it would start again.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link the app incorrectly shows "0 online" devices for my Guest network even though there are devices connected and streaming video (the router info screen shows bandwidth demand fluctuating between 2 and 20 Mbps !).
I updated my three connected M5 units to 1.6.0 build 20220525 the other day. When I first noticed the problem, Bandwidth Control was enabled (I enabled BC soon after updating the M5s' firmware), but it continues even after disabling Bandwidth Control and force closing & restarting the app.
- Copy Link
- Report Inappropriate Content
I have this too (shows no devices connected in the app) after the update. Also, my laptop has problems connecting sometimes. It will connect to a non-Deco network no problem. I have to keep rebooting all decos to get it to connect. The error on the laptop is DHCP lookup failed. I have 20+ other devices connected.
- Copy Link
- Report Inappropriate Content
Hopefully you guys can separate the list of devices connected on Main WiFi and Guest WiFi. Because on WebApp its just doesnt show, this can improve speed monitoring since now you can limit bandwidth on Guest WiFi on v1.6.0. Right now on WebApp, you can see devices per deco only which is good but hopefully can separate per WiFi too.
- Copy Link
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)
Information
Helpful: 1
Views: 11773
Replies: 53
Voters 1
![voter's avatar](/avatar/default.png)