Home Network CommunityDecoDeco BE68, BE67, BE77 and BE13000 Firmware 1.3.0 Introduces DoH/DoT, Internet Backup, 6RD Connection
Deco

Early Access Deco BE68, BE67, BE77 and BE13000 Firmware 1.3.0 Introduces DoH/DoT, Internet Backup, 6RD Connection

1234

Early Access Deco BE68, BE67, BE77 and BE13000 Firmware 1.3.0 Introduces DoH/DoT, Internet Backup, 6RD Connection

33 Reply
Re:Deco BE68, BE67, BE77 and BE13000 Firmware 1.3.0 Introduces DoH/DoT, Internet Backup, 6RD Connection
3 weeks ago

  @Atomic78 

 

I had seen that as well at first. Also IoT devices not connecting and if they did, drop off.

 

I think my solution was to shut down the modem and Deco. My theory was the Deco rebooted with the new f/w, but the modem connection was still the old one. So after ppwering off the 2, I brought up my modem first (Cable and VIOP), and once up, the Deco. 

 

That stabilized it for me, might want to give it a try.

 

Apple iWatch, disconnects and reconnects all the time. Support reported this to Apple. Nothing to worry about.

 

I did have some Spectrum TV app on my iPad lock-up occasionally, the reboot cleared that too.

  1  
1
#32
Options
Re:Deco BE68, BE67, BE77 and BE13000 Firmware 1.3.0 Introduces DoH/DoT, Internet Backup, 6RD Connection
2 weeks ago

in2ndo wrote

  @Solla-topee 

Nice update. Installation went smooth.  Any plans to add DoT / DoH IPv6 support?

  @in2ndo Hi, are you talking about DoT or DoH public servers with IPv6 connectivity, or something else?

>> Check What's Currently Going on With Deco >> Deco X50/X50Pro/X50-PoE Pre-Release Firmware 1.7.0 Introduces DoH/DoT, Channel Selection, and More! >> Deco XE75/XE5300/XE75Pro V1 Pre-release Firmware 1.5.0 Introduces DoH/DoT, WireGuard VPN, and More!
  0  
0
#33
Options
Re:Deco BE68, BE67, BE77 and BE13000 Firmware 1.3.0 Introduces DoH/DoT, Internet Backup, 6RD Connection
2 weeks ago - last edited 2 weeks ago

  @Solla-topee  I'm no expert at this but learning. With the new and current feature of DoT/DoH on my Deco BE67 single unit, if I turn on iPV6 under internet connection option, DoH gets ignored and and when running an online test, it shows DoH "No" the DoT/DoH feature on the Deco doesn't accept iPV6 entries only iPV4 entries.  So I guess my question is, is there a plan to add the ability of adding iPV6 entries under the DoT/DoH feature?

 

Edit to add,  I think I got it to work.  DoH is now detected and iPV6 passes with a 10/10. Using Cloudflare malware blocking DNS under iPV4, the no filter on iPV6, malware blocking for iPV4 as two of the entries in DoH and  https://security.cloudflare-dns.com/ for iPV6 as the 3rd entry in DoH.

only thing is the malware blocking test from Cloudflare fails and If I use the malware blocking numbers under iPV6 in internet options, it brakes the whole thing.

  0  
0
#34
Options
1234

Tags

Highlighted Thread HomeShield DoH/DoT Official