Home Network Community > Wi-Fi Routers > EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
< Wi-Fi Routers

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

18910...

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

917 Reply
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-04 10:01:52 - last edited 2023-05-05 06:42:30

Good day,

 

Now I used the hammer wink

 

AP disconnected, Main router reset.

Then set the desired network and WiFi ( Channels still not editable To change the channel disable Smart connect). 

Then reset the AP. Reconnected without any settings.

 

After that, pressed the main router WPS button and within 2 minutes also on the other "Router".

 

Both C80 'routers' are now connected via Ethernet Backhaul as a Mesh network.

The second neatly as a node with the settings of the main router.

 

Short version, two C80 routers can be used as a Mesh network.

This may apply to other types of TP, Onemesh / Easymesh.

 

 

Regards,

 

Thom

 

  4  
  4  
#88
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-05 08:12:22

@Thom_NL 

 

Great job.yes

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#89
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-05 10:54:50

  @Kevin_Z hi,

 

The use of the hammer was the solution enlightened

 

Hope that this information can help other users.

 

 

Regards,

 

Thom

  0  
  0  
#90
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-06 01:29:40

@Thom_NL 

 

What does this mean? I'm curious.

If my reply helps with the issue, please click on the arrow pointing upward. If it solves your issue, please click the star to mark it as a "Recommended Solution".
  0  
  0  
#91
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-06 14:21:14 - last edited 2023-05-13 17:55:21

  @Liverpool20 hi there,

 

I have used 2 C80 routers to create a Mesh wireless system laugh

 

* Update* 

Now i have 3 C80 'Routers'  as a working mesh network.

 

 

Regards,

 

Thom

  0  
  0  
#92
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-11 16:47:30

  @Kevin_Z

Will the EasyMesh feature  be availabe for Archer AX73 routers?

 

Thank you.

  0  
  0  
#93
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-12 10:59:47

 

Nyku wrote

  @Kevin_Z

Will the EasyMesh feature  be availabe for Archer AX73 routers?

 

Thank you.

 

@Nyku AX73 is planned to support EasyMesh as per the EasyMesh device list.

 

Pay attention to any newer firmware that could be available on your router web GUI or the Tether App.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#94
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-12 11:01:22 - last edited 2023-05-12 11:06:55

  @Nyku and @Kevin_Z 

 

No because the AX73 is a Onemesh device??
 

Onemesh and Easymesh are different ways to create a Mesh network, but is there a merging going on?  Onemesh <> Easymesh ??

 

 

Regards,

 

Thom

  0  
  0  
#95
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-12 13:50:53

  @Kevin_Z 

On the router webinterface i see only OneMesh option.

On the webpage for supported devices for EasyMesh also this router is listed.

So i`m now confused. By default, only OneMesh is available.

  0  
  0  
#96
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-12 14:14:26 - last edited 2023-05-12 14:16:15

  @Nyku.

 

The easymesh update is planned.

When it's available then you update your device 😉

 

 

Regards, 

 

Thom

  0  
  0  
#97
Options
18910...

Tags

EasyMesh Firmware Update Highlighted Thread EasyMesh Ethernet Backhaul
Related Articles
EasyMesh not on AX53
2091 0
What is EasyMesh and how does it work with TP-Link routers and extenders?
88836 19
EasyMesh Configuration
713 0
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
13525 9
Archer C7 V5 - EasyMesh Support
1347 0
GX90 EasyMesh
130 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.