RV30 not going under every kitchen kickboard

RV30 not going under every kitchen kickboard

RV30 not going under every kitchen kickboard
RV30 not going under every kitchen kickboard
2024-05-24 09:13:23 - last edited 2024-06-07 08:58:49
Tags: #kickboards
Model: Tapo RV30 Plus  
Hardware Version:
Firmware Version:

I'm having issues where my RV30 Plus will not always hoover right up under the kitchen cupboards and right up to the kickboards. They're all the same height, there's sufficient height for the robot to get underneath, but oddly the robot will only go right underneath some of them. To the extent, that it will hoover along a few metres under the cupboards, then decide it needs to move out from underneath for the rest of the length of the cupboards and leave a ~10 cm gap of unhoovered crumbs.

 

Any ideas or tips on how to get the RV30 to hoover right underneath all kickboards?

  0      
  0      
#1
Options
1 Accepted Solution
Re:RV30 not going under every kitchen kickboard-Solution
2024-05-27 06:41:45 - last edited 2024-06-07 08:58:49

  @Arfa 

 

Please observe if there's anything obstructing the robot vacuum from entering under these pieces of furniture.

 

You can test by creating a zone specifically for these areas and initiating area cleaning to see if the robot vacuum enters underneath the furniture.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:RV30 not going under every kitchen kickboard-Solution
2024-05-27 06:41:45 - last edited 2024-06-07 08:58:49

  @Arfa 

 

Please observe if there's anything obstructing the robot vacuum from entering under these pieces of furniture.

 

You can test by creating a zone specifically for these areas and initiating area cleaning to see if the robot vacuum enters underneath the furniture.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#2
Options