Early Access Pre-release Firmware for Archer AX53/AX58 Supports EasyMesh in AP Mode, Ethernet Backhaul, ECO Mode
Updated on Jun 3, 2025:
The official version 1.4.3 Build 20250314 is gradually rolling out, and users can check for updates on the AX53's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.
Users can also get a direct download link of the new version from the website as follows:
https://www.tp-link.com/support/download/archer-ax53/v1/#Firmware
This thread will be locked for further comments then. Please start a new thread to open a discussion if you have any questions.
---------------------------------------------------------------------------------------------------------------------------------------
Hello Everyone,
We're thrilled to announce the release of the pre-release firmware for Archer AX53/AX58 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, ECO Mode, etc. We encourage you to try out this version of firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
New Features and Modifications:
1. Added Ethernet Backhaul for EasyMesh.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
5. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
6. Added IoT Network.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added support for VPN Client.
11. Added support for WireGuard.
12. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
13. Added new functions to the Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
14. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
15. Improved client type identification accuracy.
16. Optimized the overall system stability and performance.
Firmware Download:
Before the Upgrade
(1) IMPORTANT!: Once upgraded to the 1.4.x firmware, you CANNOT downgrade back to the 1.3.x or 1.2.x version.
(2) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(3) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(4) This pre-release firmware for Archer AX53/AX58 V1 can be applied to all versions (EU/US/AU/KR/etc.).
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) The screenshots in this article are taken from the web GUI or Tether App of Archer AX55 V1 for reference.
Direct Firmware Download Link
| Archer AX53/AX58_V1 | Archer AX53/AX58_V1_1.4.3 Build 20250314 (Pre-release Firmware) UPDATED |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Thank you for your continued support and for being part of our community.
Update Log
Apr 11th, 2025:
Update to provide a new 1.4.3 pre-release version.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Katash
It would seem if I factory restore the device it returns to working at full speed wifi, as soon as I restore a backup I'm back to having same problem.
Did it twice and confirmed result both times
Clearly there is a problem with my original (working fine before firmware update) config that caused wifi instability.
Anyone from TP-Link support here able to take a look at my backup file and see what the issue is please?
- Copy Link
- Report Inappropriate Content
Hello @DanySupernova ,
Thanks for your reply and update.
I am glad to hear that your issue has been resolved.
Please do not hesitate to contact us if you have any further questions.
- Copy Link
- Report Inappropriate Content
Hi Joseph, there are still 2 points after upgrading to 1.4.4 that I need clarity on:
1) The IoT Network, as shown below, are only available on the Router (AX53v1). It does not get distributed to the Satellites.
Is this how it should work or a bug?
2) After a scheduled reboot, I struggle alot to get the Ethernet wired back haul back again, as shown below. It always default to Wifi. After a couple of reboots on "Living Room" and "Bedroom" Satellites it eventually change to Ethernet Back haul. Any reason why this is the case?
After reboots it moves from wifi back haul to ethernet back haul as shown below: It will now stay like this until the next scheduled reboot of the Router.
My Setup is as shown below:
Thanks for your support on this.
- Copy Link
- Report Inappropriate Content
Hello@Katash ,
Welcome to our community.
Is the wired connection working? If so, try the following suggestions:
1) Make sure the Router is properly placed; it should be put in an open area instead of inside a cabinet or shelf.
2) Change the wireless channel to another one. You may refer to Changing Channel and Channel Width on a TP-Link Router (new logo).
3) Change channel to avoid interference. For 2.4GHz wireless client devices, adjust the 2.4GHz channel width to 20MHz; for 5 GHz wireless client devices, adjust the 5GHz channel width to 80MHz or 40MHz, etc.
Does the problem recur if you reset and reconfigure without restoring backup files?
Best Regards.
- Copy Link
- Report Inappropriate Content
Hi@Duppie007,
Welcome to our community.
Is the living room unit always connected to the bedroom unit via Ethernet cable? Is there any switch in the whole network?
If you swap the Living room unit with the other units, that is, connect them directly to the main router, can Ethernet Backhaul be established normally after reboot?
- Copy Link
- Report Inappropriate Content
Thanks for the response.
Yes the living room unit is always connected to the bedroom unit via Ethernet cable.
From Bedroom to Router there is a TP-Link switch. That said, I have no issue with Bedroom Satellite.
Will test the direct connection of the living room Satellite directly to router and feedback.
- Copy Link
- Report Inappropriate Content
@Kevin_Z I see that for AX53 the official Firmware is now available 1.4.4. But what about AX58 v1 ? I see nothing from the official Firmware page ? Is the 1.4.3 pre-release compatible with AX58 it's not 100% clear 🤔
Many thanks in advance!
- Copy Link
- Report Inappropriate Content
I eventually had some time to do some further testing. When directly connected to Router no issue is experienced when rebooting.
Ethernet mesh are always established. What I did find is that I have configured the Satelites under DHCP setting with Address Reservation.
When removing the Satelites from the Address Reservation under DHCP the problem seems to have been resolved. :-)
The Only open point, for me, is the below. Any update on your side if this will be fixed? Thanks.
- Copy Link
- Report Inappropriate Content
Hi@Duppie007 ,
We're glad to hear your issue has been resolved.
You can check the 'New Features and Modifications' section of this post. Currently, the Archer AX53 has added an IoT Network, but it doesn't yet support simultaneous IoT network expansion with a satellite router. This request is being planned, so stay tuned.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 32169
Replies: 210
Voters 1
