Early Access Pre-release Firmware for Archer AX53/AX58 Supports EasyMesh in AP Mode, Ethernet Backhaul, ECO Mode
Updated on Jun 3, 2025:
The official version 1.4.3 Build 20250314 is gradually rolling out, and users can check for updates on the AX53's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.
Users can also get a direct download link of the new version from the website as follows:
https://www.tp-link.com/support/download/archer-ax53/v1/#Firmware
This thread will be locked for further comments then. Please start a new thread to open a discussion if you have any questions.
---------------------------------------------------------------------------------------------------------------------------------------
Hello Everyone,
We're thrilled to announce the release of the pre-release firmware for Archer AX53/AX58 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, ECO Mode, etc. We encourage you to try out this version of firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
New Features and Modifications:
1. Added Ethernet Backhaul for EasyMesh.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
5. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
6. Added IoT Network.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added support for VPN Client.
11. Added support for WireGuard.
12. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
13. Added new functions to the Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
14. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
15. Improved client type identification accuracy.
16. Optimized the overall system stability and performance.
Firmware Download:
Before the Upgrade
(1) IMPORTANT!: Once upgraded to the 1.4.x firmware, you CANNOT downgrade back to the 1.3.x or 1.2.x version.
(2) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(3) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(4) This pre-release firmware for Archer AX53/AX58 V1 can be applied to all versions (EU/US/AU/KR/etc.).
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) The screenshots in this article are taken from the web GUI or Tether App of Archer AX55 V1 for reference.
Direct Firmware Download Link
| Archer AX53/AX58_V1 | Archer AX53/AX58_V1_1.4.3 Build 20250314 (Pre-release Firmware) UPDATED |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Thank you for your continued support and for being part of our community.
Update Log
Apr 11th, 2025:
Update to provide a new 1.4.3 pre-release version.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi@DJPRMF,
Thank you for your reply.
Could you please help us collect the link speed which may help us locate the issue faster:
How to check the associated/link speed on a wired client
How to check the associated/link speed on a wireless client
Here are some tips which might improve the speed of your Archer Router:
1) If Ethernet speed is slower than expected, please try different Ethernet cables (CAT5E or above) on the Router.
2) Disable QoS, please access http://tplinkwifi.net and go to Advanced >> QoS to disable it.
3) Disable Parental Control, please go to Advanced >> Parental Control to disable it.
4) If wireless speed is slower than expected, please go to Advanced >> Wireless Settings to change the 5GHz Wi-Fi channel, you may try different channels to find the best one for your environment.
5) Disable SIP ALG and UPNP, please go to Advanced >> NAT Forwarding >> UPNP to disable UPNP, go to Advance >> Security to disable SIP ALG.
6) Try a few other speedtest servers, other servers might reach better speeds.
- Copy Link
- Report Inappropriate Content
Hi,
The link speeds are OK (1000 Mbps). Note that this issue only appears after the firmware upgrade, and is not related with my setup (cable, etc). If i use other router, or even the ISP one, is working fine. This just started after the recent upgrade of the firmware.
About the rest:
1) I am using a CAT 6e cable, and try different cables. No change here.
2) QoS is disabled.
3) Parental Control is disable.
4) The issue is related with the WAN speed...
5) SIP ALG and UPnP are disable
6) Is not a "speedtest server" issue.
Thanks
- Copy Link
- Report Inappropriate Content
Hi@DJPRMF,
Thank you for your detailed reply.
According to our previous communication, all client devices should be affected, right? What are they? How are they connected to the router?
Please force the WAN negotiation speed to 1000Mbps for a test on the Advanced->Network>Internet page. (If the Internet drop after fixing the negotiation speed to 1000Mbps, please change it back to auto to restore the connection).
Please provide a screenshot of the router WAN/LAN rate negotiation, Go to Network Map--Archer AX58--Ethernet Status.
You mentioned that QoS has been disabled. For comparison, set Qos according to the network bandwidth, add the test device as high priority, and collect QoS setting screenshots.
Please send the test results above to email support.forum@tp-link.com, attaching [Forum ID 766942] and details, and we will have a dedicated person to assist in analysis and follow-up.
- Copy Link
- Report Inappropriate Content
Hi,
As stated before, yes. This affects the WAN speed, and so, every device.
Forcing to 1000 Mbps in the router doesn't change the issue.
This issue only appear in the recent upgrade of firmware. Before this was ok.
Thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi@DJPRMF,
After updating the firmware, have you tried to reset the router and reconfigure the router?
Also, which version did you use to upgrade to version 1.4.3? Please try to downgrade to the previous version of the firmware to check whether the problem disappears?
If the problem disappears after rolling back to the previous version, I will report it to the relevant technical department. Please wait for the official release of 1.4.3 before upgrading the firmware.
Thank you for your understanding and cooperation.
- Copy Link
- Report Inappropriate Content
@Kevin_Z How to downgrade or Have the stable version ? im afraid of these bugs bro frfr
- Copy Link
- Report Inappropriate Content
@Danny-- You can't. See the first post - is even in RED.
I didn't respond to the previous answer from @Joseph-TP since makes no sense and is leading to someone brick the router trying to do it. Along with "steps" that i have already stated before that have been done.
- Copy Link
- Report Inappropriate Content
@DJPRMF i mean we can down grade to 1.4.x i guess that means WE CAN ROLL BACK TO 1.4.2 WHICH IS STABLE PLEASE HELP ME
- Copy Link
- Report Inappropriate Content
@Joseph-TP 
IVE UPGRADED FROM 1.4.2 TO 1.4.3 PLEASE I NEED 1.4.2 STABLE LINK IM FACING AALOT OF ISSUES HERE IN 1.4.3 Such as if i connect 3 blackhaul ethernet wired router is glitching
and randomly glitcing at night times and became unresponsive did factory reset 3 times so please give me 1.4.2 Link :)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 32462
Replies: 211
Voters 1
