I have three ISPs (cable, DSL, cell), each run into one of WAN, WAN/LAN1, WAN/LAN2. All connections seem to be working, and to a degree traffic is flowing. (Just rebooted, so traffic is low.) However,

After moving into my own home, a three-storey building, I have bought into the Omada ecosystem with the following TP-Link hardware: ER605 v1.0 @ firmware 1.3.1 SG2218 v1.20 @ firmware 1.20.0 TL-SG2210

Hi, I have two WANs coming into the locartion, originally Ports WAN/LAN4 = Provider 1, WAN/LAN5 = Provider 2 I enabled port WAN/LAN6 and moved Provider 2 onto this and Provider 1 across to the WAN/LAN

I set up location A with two APs and the OC200 (v2.6, running 5.12.9) was local to that network. I then moved to location B, and was unable to find the devices on the network from the Omada page. I th

Hi. I have configured 3 LACP teams via Omada Software controller on an SG3428X v1. Now, I removed team 2. Team 1 and 3 continue to work properly, but the former ports of team 2 are now unusable. Disab

Hello, I have configured two vlans with id 1 and 2 on the er706w router. Computers are connected to vlan1, vlan2 is WiFi. I added a rule that blocks communication between VLAN networks and Wifi device