Smart Home Community > All Threads > D230S1 not always recording (or notifying) when the camera is passed
< All Threads

D230S1 not always recording (or notifying) when the camera is passed

D230S1 not always recording (or notifying) when the camera is passed

D230S1 not always recording (or notifying) when the camera is passed
D230S1 not always recording (or notifying) when the camera is passed
a week ago
Tags: #Motion Detection #Recording #Notification
Model: Tapo D230S1  
Hardware Version:
Firmware Version: 1.1.18

Hi,

 

I have been using the doorbell for a couple of weeks now and I notice that not all people/cars/etc passing by are being recorded. A notification is also not being send. In general the device seems to work just fine, but on several occassions I noticed cars driving away that had never come in (according to the recording/notifications). 

 

Does anyone know how to solve this issue?

 

Kind regards,

  0      
 
  0      
 
#1
Options
3 Reply
Re:D230S1 not always recording (or notifying) when the camera is passed
a week ago

  @Rode_kater 

 

Please check the doorbell detection settings (enter device page > Device Settings > Detection > Wake-up Settings), and verify which detection type you chose.

 

When "Doorbell Pressed" is selected, the camera starts to detect and record when someone presses the doorbell. 

When "Event Detectedf" is selected, the camera wakes up when detecting movement and then starts detection and recording.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#2
Options
Re:D230S1 not always recording (or notifying) when the camera is passed
a week ago

  @Wayne-TP Thanks for your reply. Unfortunately, the settings here are already in place as you described. I have set the sensitivity higher (10) but still I can't see my car (which is not very small) leave the premises in the morning. No video was captured at all. Other times, I do see people walking by, coming in, leaving, etc.

In addition to that, it seems that in some cases the first part of the video is missing (the car is already half-way out of sight for example)

 

I am not sure what to do. Any help would be welome.

  0  
  0  
#3
Options
Re:D230S1 not always recording (or notifying) when the camera is passed
Tuesday

  @Rode_kater 

 

Did you choose "Event detected" in the wake-up settings? What types of detections have you enabled?

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 102

Replies: 3

Tags

Motion Detection Recording Notification
Related Articles
Doorbell D230S1 is not recording
2904 1
Not always recording on bell ring
492 0
D230S1 Detection Range
272 0
D230S1 don’t livestream or show video when answer doorbell
604 0
Tapo Doorbell D230S1 - Questions
1517 2
D230s1 screws
599 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.