Home Network Community > Wi-Fi Routers > EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
< Wi-Fi Routers

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

1949596...

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

1046 Reply
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-12 23:37:15

  @Thom_NL I am not getting the idea on how to connect 3x C80s via Ethernet Backhaul. 


Do I need to connect the Lan cable from the main router to the Wan port of the second router (satellite), press WPS and set up. 

 

And for the 3rd router (second Satellite), a cable from any Lan port from the 1st satellite to the Wan Port of the 2nd Satellite?

 

 

 

 

 

  0  
  0  
#115
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-12 17:28:14

  Hi  @klipse,

 

With a small bypass i could replicate your screen.

Thanks for your explanation.

 

 

Regards,

 

Thom

 

 

  0  
  0  
#114
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-12 14:40:08

  @Thom_NL 

 

I get this view when logging into the main router via the browser on my iPhone, obviously when connected to my wifi :-)

BT Full fibre 500, 1x X60 V3.2 in router mode and 1 x XE75Pro V2.
  0  
  0  
#113
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-12 10:17:29

  @Flpp,

 

OK great, that explains a lot.

 

I'll check at home and see if my GUI looks like this too.

 

 

Regards,

 

Thom

 

  0  
  0  
#112
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-12 09:29:42

  @Thom_NL 

That was a print screen from my phone, main router web page -> Network Map & click on the Mesh Devices Icon

  0  
  0  
#111
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-12 07:39:35

  @Flpp ,

 

Good to hear yes

 

Question from my side, which App/Tool are you running?
I have the Tether but it looks very different.

 

Thanks in advance,
 

Thom

  0  
  0  
#110
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-11 16:41:49

  @Thom_NL 

OMG!

That was it, I was not using the WAN port.

And as this was the second mesh device I just pluged it and ... forgot to check.

 

thank you!

  2  
  2  
#109
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-11 11:20:30

  @Flpp,

 

Did you connect them through the WAN port?

That can be reason.

 

Regards,

 

Thom

 

  1  
  1  
#108
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-11 10:34:28 - last edited 2023-06-11 10:38:08

@Kevin_Z 

 

Hi,

wondering if I can do something that will force the connection to ethernet.

I have 3 Archerc80 routers, upgraded to latest firmware and configured them to easymesh.

The routers have cat6 cable connections ... but one of them is showing as connected via wifi to a low signal.

 

So, what can I do to force the connection to go ethernet/wired?

 

mesh wifi 

 

 

  1  
  1  
#107
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-17 10:08:19 - last edited 2023-05-17 10:09:37

  @Thom_NL 

 

Well, I guess most importantly - the scheme works :) Thanks for confirming!

 

Since I have a 1 Gbit connection, I wanted to utilize the wireless speed by waiting until the feature and FW is available for any of the AX devices (that can reach 800-900Mbits over WiFi). Considering that it has been almost 6 months since the initial release and no updates for other devices, I just might give up and get a few of the C80 routers as you did.

  0  
  0  
#105
Options
1949596...

Tags

EasyMesh Firmware Update Highlighted Thread EasyMesh Ethernet Backhaul
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.